Measuring Tools

Stainless Steel Rules 6" Stainless steel clearly graduated in 1/2mm and millimetres on the metric side; and 16ths, 32nds and 64ths on the imperial side. Note: B1813 is graduated only in metric

Dial Indicator 2" Dia. Face - 1" Travel These dial gauges fit all standard magneticc basesSatin chrome-plated case Easy-to-read faces .001" reading Precision ground hard chrome-plated stem and contact point

B2153 12" (300mm) Stainless Steel Rule This 12" scale is made from tempered stainless steel with chrome finish and is precision ground for straightness and parallelism.

B3262 32" Aluminum Miter Track Works with standard 3/4" x 3/8" miter gauges with or without T-slot Slides into miter track or miter slot on your table saw Use on table saw extensions, drill press tables & band saw tables Features 5 pre-drilled holes

Standard Magnetic Holder Powerful permanent magnet holding power Accepts all standard dials and stems On-off lever quickly releases magnet|

B3737 With the angle sensor technology this unit can be used for many things like helping dial in the desired angle of your table saw blade with greater accuracy. The digital angle box level displays the measurements on a large backlit easy to read...

B3136 0-6” DigiMag Digital Scale and Magnetic Remote Readout Vertical & Horizontal Beam 2-in-1 for Router lift, Router table, Planer, & Table Saw Quick measure speed at 120” per second Large crystal LCD display...

B313612 0-12” DigiMag Digital Scale and Magnetic Remote Readout Vertical & Horizontal Beam 2-in-1 for Router lift, Router table, Planer, & Table Saw Quick measure speed at 120” per second Large crystal LCD display Magnetic & Clamp hardware on remote...

Magnetic Holder With Fine Adjustment Powerful permanent magnet holding power Accepts all standard dials and stems On-off lever quickly releases magnet|

2 in 1 Router Depth & Saw Gauge This 2 in 1 gauge is really an all in one gauge as it can be used to set up table saws, band saws and routers in a quick and efficient manner. Step gauge from 1/8" to 2" Router depth gauge from 1/8" to 1"

B1086 8" Round Protractor Stainless steel protractor provides accurate measurements Easy to read etched numbers Locking arms helps prevents measuring mistakes

Dial Indicator 2" Dia. Face - 1/2" Travel These dial gauges fit all standard magneticc bases| Satin chrome-plated case Easy-to-read faces .001" reading Precision ground hard chrome-plated stem and contact point

B622 Thickness Gauage 26 leaf thickness gauge. Each leaf is marked. Leaves from .0015” to .025”Edge of each leaf is round and approximately 3 3/8” long. High quality tempered steel, and made to close tolerances.

Centre Gauge 60° Assure proper set up when threading. Tempered stainless tool steel. Satin chrome finish, no glare. Graduated in 14th and 20th on one side, and 24th and 32nd on the other. Notches have clearance slots. Table for double depth American...

8" Wing Compass - Groz This rugged industrial grade compass is manufactured from heavy gauge steel with an attractive black powder coated finish. The tip is accurately ground. Heavy Duty hinge and knurled locking nut help in convenient movement. Used...

B3427 Beam Compass Designed to mark circles on drywall, plywood and other building materials Helps make accurate hole markings Adjustable pivot point and integrated pencil holder make perfect circles 16" long fibreglass

B313624 0-24” DigiMag Digital Scale and Magnetic Remote Readout Vertical & Horizontal Beam 2-in-1 for Router lift, Router table, Planer, & Table Saw Quick measure speed at 120” per second Large crystal LCD display Magnetic & Clamp hardware on remote...

KMS7724 1/2" Wide Self Adhesive Measuring Tape - KREG TOOLS This 1/2" wide self adhesive measuring tape fits into the indentation on the top side of the Kreg Top Trak and Heavy Duty Track aluminum extrusions. Since the tape has self adhesive backing,...

KMS7723 1/2" Wide Self Adhesive Measuring Tape - KREG TOOLS This 1/2" wide self adhesive measuring tape fits into the indentation on the top side of the Kreg Top Trak and Heavy Duty Track aluminum extrusions. Since the tape has self adhesive backing,...

B3097 6" (150mm) Stainless Steel Scale This 6" scale is made from tempered stainless steel with chrome finish and is precision ground for straightness and parallelism.

MITER1000HD Miter Gauge 1000 High Definition - INCRA The NEW INCRA Miter 1000HD is the most refined model yet in the Miter 1000 series. The HD stands for High Definition; because the protractor plate's exclusive AngleLOCK Indexing System has a...

Indicator Accessory Kit 22 assorted points that will fit most indicators 4-48 thread Complete with case

MITER1000SE INCRA MITER GAUGE SPECIAL EDITION The Miter 1000 Special Edition builds on the excellent foundation provided by the Miter 1000. The Incra exclusive AngleLOCK Indexing System delivers 41 lock solid angle stops in 5-degree increments over a...

B3263 ALUMINUM MITER TRACK 36" 36" Aluminum Miter Track that works with standard 3/4" x 3/8" miter gauges with or without T-slot. Slides into miter track or miter slot on your table saw and can be used on table saw extensions, drill press tables &...

Dial Test Indicator Fully jeweled movement Range: .03" Reading: 0-15-0" Graduation: .0005"

WR25 Height Gauge Mini WIXEY The large easy to read display reads in inches with fractions or millimetres. The fractions are displayed using "Precise Fraction Technology" which gives you 4 times the accuracy of other fraction readouts. The decimal...

B3739 This angle finder ruler is capable of measuring both angle and length in metric or imperial scale. This would be a great tool for woodworking and setup or adjusting of table saw blade angle, miter saw, and band saw. Features: Measuring angles...

Vernier Caliper - 8" Made of tool steel throughout, for outside, inside and depth measurements Satin chrome finish prevent rust and wear Raised sliding surfaces prevent defacement and wear of graduations: clear black engravings Hardened measuring...

Digital Indicator This digital indicator replaces the "dial indicator" with advanced and more accurate readings. This unit features 3 way readings in inch, metric and fraction. Other unique features include ABS, HOLD function and Data Output to PC...

WIXEY DIGITAL READOUT IMPROVED VERSION The Wixey Planer Digital Readout model WR510 has a new angled display for easy viewing as well as "auto shut off." And like the WR500, it fits most portable woodworking planers. It easily mounts to Craftex,...

B3129 12" Ruler - Igaging Hardened stainless Steel, satin chrome, 4R scale Adjustable hook can be used on both sides Highly accurate Size: 12"

Multi Purpose Angle Finder With this tool you can find outward, inward and sloped angles very easily and accurately. It is made of tough, flexible plastic and has brass fittings. The protractor features large hollow rivet joints ideal as it is designed...

INCRA MITER GAUGE V27 The NEW Incra Miter V27 is engineered to provide a high performance, yet low cost upgrade for your Table Saw, Band Saw, Router Table, Disk Sander, Belt Sander or any other tool in need of a better miter gauge. Like all Incra Miter...

ÿþB3128 10" Rule and 8" Digital Protractor - iGaging Stainless steel rule blades with mm and 1/64 , 1/32 and 1/64 scales Strong/firm lock Hold function Reversible reading Inside & Outside angle measure Easy to use & easy to carry Light...

MITEREXPRESS INCRA MITER GAUGE EXPRESS The NEW Incra Miter Express Makes Safe and Easy Mitered Cuts Incra's new Miter Express offers any miter gauge owner the safest and most accurate cross-cutting and mitering platform available. Turn any miter...

INCRA PRECISION MARKING RULE 12" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...

Gauge Screw Cutting Made from stainless steel in satin chrome finish. Permanently deep etched graduations Accurate tread profiles 47 - 1/2" degree 14 - 1/2 degree 55 degree and BSF, 60 degree

B3130 Digital Level & Bevel Gauge - Igaging 3-Side Magnets, 4-Side Measuring Digital Level & Bevel Gauge 2-in-1 Heavy duty aluminum alloy body Tracing absolute level Measuring relative bevel Strong magnets on the bottom and 2 sides Large clear...

This miter gauge with extendable fence is made from die cast aluminum and is simple to adjust to any angle between 0° and 60° as needed. Another great feature is the anodized alloy fence that is fitted with an adjustable length stop for...

B31586 6" Digital Caliper - iGaging Easy to Read Super Large Display LCD Quick measure speed at 120” per second Water, oil and dust resistance Hardened stainless steel Inside & Outside measures Precision lapping finish Accuracy: 0...

With the angle sensor technology this unit can be used for many things like helping dial in the desired angle of your table saw blade with greater accuracy. The digital angle box level displays the measurements on a large backlit easy to read LCD and has...

Indicator Holder (Universal) Clamping dia.: 1 7/8" Length to indicator: 4 1/2" Mounts directly on machine quill Fits all indicators with 5/32" shank Indicator not included

All squares in this kit are precision ground. The beams and blades are ground for both parallelism, squareness of both edges of the blade are maintained with both faces of the stock. These squares are only equipped with hardened blades. These are...

B3099 Multipurpose Angle Protractor This multipurpose tool can be used as a protractor, a center finder, a square, a circle divider and a drill point gauge. The tool is constructed of high quality stainless steel and features clear embossed markings...

8601 Depth Gauge Milescraft Quickly and accurately locate and/or measure and mark blade and bit heights, and fence offsets. Depth Gauge Features: Durable metal scale measures in inches or millimeters Metal locking knob Wide base with sturdy...

B3114 6" Divider with Carbide Scriber This tool combines rigidity, light weight and easy handling and ensures transferring precise angle measurements. the fittings are solid brass with carbide scriber for scribing on metals, wood, plastic, aluminum and...

Digital Height Gauge This large LCD display Stainless Steel Digital Height gauge has many features not found on other height gauges. First the strong magnets on the base allow for easy setting on steel table tops and fence sides. The unit allows for 2D...

Brass Sliding Caliper Solid brass 4«" long Dovetail slide calibrated 0-4" and 0-100mm Perfect pocket measuring tool in presentation case

IGaging Digital Planer Readout for Dewalt DW735. Features: 3 playback positions in inches / mm / inchesFlow rate: 15.2 cm. Resolution: 0.01 mm.Functions: preset, calibrated, absolute, incremental.Backlit displayStainless steel beam...

33716 STANLEY FAT MAX 16' TAPE MEASURE 33716THR These rugged and durable Stanley Fat Max 16’ tape measures (SAE) are great for use in the shop. The rugged design and comfortable ergonomic grip make them comfortable and easy to work with...

INCRA PRECISION MARKING RULE 6" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...

6" Dial Caliper 4-way measurement, outside, inside, depth and step measurement Large dial means wide graduation spacing for clear, fast and accurate reading Dial is adjustable for setting to make relative measurement Scale surface is satin-chrome...

4" Digital Caliper Range 0-4"/0-90mm Resolution: .0005"/.01mm Stainless steel with hardened jaws Inside, outside and depth

B3126 6" Hooked Rule 4R - iGaging Hardened Stainless, Satin Chrome, 4R Scale Adjustable hook can be used on both sides High accuracy

B3259 6" Digital Caliper - iGaging Large Display for easy view High Measuring speed 120"/second 3 Reading: Inch, Metric and Fraction Dust resistance Hardened Stainless Steel with precision lapping finish Smooth movement SPECIFICATIONS Measure...

5" Contour Gauge helps duplicate the profile of moldings or other irregular shaped objects to scribe and cut pieces for a more accurate fit. Equipped with a locking function that allows of accurate and easy transfer of profiles with out worry...

Saw Step Gauge Heavy Gauge Aluminum Our step gauge gives you an exact setting, the first time, regardless of width or set of the blade. More accurate than any ruler. It will set your rip fence, your radial or table saw depth of cut and measure groove...

Screw Pitch Gauges Features Made of tempered steel and are precision ground T.P.I. stamped on each blade All blades can be locked to any desired position Number of blades: 30 TPI: 4-42

B3131 0-6" 3 in1 inch & metric Digital Multi Gauge - Igaging Router Depth / Slot Depth / Welding Thickness  3-in-1 3-Way Measure: Horizontal, Vertical, 90-degree Angle 3-Way Reading:  Inch, Inch Fractional, Metric EZ View: Super Large LCD...

Manual-reading miter saw protractors are used to find angles on corners. These protractors have two flat arms that extend from a central pivot assembly where angle scales are marked. These arms rotate to come flush with two adjoining surfaces that need...

This 5 pc Precision Layout and Marking set is CNC machined with a precision ground measuring face for high accuracy and repeatability. The laser engraved scale with black lines against the sand blasted finish allow for easy reading. All gauges a...

This highly accurate professional quality 0-1" x 0.001" Dial Indicator, 0.03" x 0.0005" Dial Test Indicator with a 30kg Magnetic Base come safely packed in a tough durable molded plastic case. 0-1" Dial Indicator: AGD 2 Style Lug back with 1/4 hole...

B3116 3-pcs 6" Premium Quality Calliper Set This set features a 6" inside calliper, a 6" outside calliper and 6" straight divider used for checking and transferring dimensions accurately. It is a must have set for serious or amateur hobbyists.

B3476 Angle Cube Digital Sensor Level - iGaging Portable digital angle gauge with magnetic base feature rich, smaller and lighter than ever before! get precise angle readings. Large LCD display reads upright at any angle. Digital angle...

Digital Caliper Range: 0-6"/0-150mm Resolution: .0005"/.01mm Easy conversion from inch to metric and vise versa