Wood Lathes

Wood Lathes

  • HSS INS TEARDROP/ INSIDE/ OUTSIDE CUTTER

    Robert Sorby

    HSS INS TEARDROP/ INSIDE/ OUTSIDE CUTTER

    CAD $19.99
    RSTMTIP6 High Speed Steel Teardrop / Inside / Outside Cutter - Robert Sorby Perfect for scraping / shear scraping inside and outside Interchangeable with one tool Indexable, patented cutting head for shear scraping Interchangeable cutter head –...
    RSTMTIP6
    CAD $19.99
    Add to Cart
  • HSS INSERT MUSHROOM CUTTER

    Robert Sorby

    HSS INSERT MUSHROOM CUTTER

    CAD $19.99
    RSTMTIP7 High Speed Steel Mushroom Cutter - Robert Sorby For undercutting small hollow forms Interchangeable with one tool Indexable, patented cutting head for shear scraping Interchangeable cutter head – no need to buy whole new tool Flat...
    RSTMTIP7
    CAD $19.99
    Add to Cart
  • HSS INSERT ROUND CUTTER

    Robert Sorby

    HSS INSERT ROUND CUTTER

    CAD $19.99
    RSTMTIP1 High Speed Steel Round Cutter - Robert Sorby For internal waste removal, shaping and finishing Interchangeable with one tool Indexable, patented cutting head for shear scraping Interchangeable cutter head – no need to buy whole new tool...
    RSTMTIP1
    CAD $19.99
    Add to Cart
  • Robert Sorby

    TOOL REST STEM 1IN. X 4.3/4IN.

    CAD $24.99
    765S24 1" Diameter Stem x 4-3/4" Long - Robert Sorby These high quality modular tool rest posts are made from super strong, precision ground polished alloy steel for vibration free turning. This modular tool rest system enables the turner to build up a...
    765S24
    CAD $24.99
    Pre-Order Now
  • Robert Sorby

    TOOL REST STEM 1IN. X 6IN.

    CAD $24.99
    765S24L 1" Diameter Stem x 6" Long - Robert Sorby Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used...
    765S24L
    CAD $24.99
    Pre-Order Now
  • Robert Sorby

    TOOL REST STEM 7/8IN. X 4.3/4IN.

    CAD $24.99
    765S22 7/8" Diameter Stem x 4-3/4" Long - Robert Sorby Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is...
    765S22
    CAD $24.99
    Pre-Order Now
  • Robert Sorby

    BOX TURNERS TABLE

    CAD $25.99
    768 Box Turner's Table Tool Rest for Modular Tool Rest System Modular tool rest system enables the turner to build up a collection of tool rests without going to great expense Made from precision ground, polished and hardened allow steel Box turners...
    768
    CAD $25.99
    Add to Cart
  • CARBIDE INSERT SQUARE CUTTER TUNGSTEN

    Robert Sorby

    CARBIDE INSERT SQUARE CUTTER TUNGSTEN

    CAD $26.99
    RSTMCT3 Square Tungsten Carbide - Robert Sorby For initial external waste removal and straight edge shaping Interchangeable with one tool Indexable, patented cutting head for shear scraping Interchangeable cutter head – no need to buy whole new...
    RSTMCT3
    CAD $26.99
    Add to Cart
  • CHISEL BEAD FORMING 1/8IN. H.S.S. SORBY

    Robert Sorby

    CHISEL BEAD FORMING 1/8IN. H.S.S. SORBY

    CAD $46.99
    835H18 1/8" H.S.S Bead Forming Chisel - Robert Sorby These tools provide the means of forming perfect beads from 1/8" to 1/2". The nose design permits multiple beads to be cut with precision on spindle for faceplate work. Slight movement...
    835H18
    CAD $46.99
    Add to Cart
  • CHISEL BEAD FORMING 3/16 H.S.S. SORBY

    Robert Sorby

    CHISEL BEAD FORMING 3/16 H.S.S. SORBY

    CAD $46.99
    Bead Forming Tool - 3/16" By Robert Sorby H.S.S. These tools provide the means of forming perfect beads from 1/8" to 1/2". The nose design permits multiple beads to be cut with ??
    835H316
    CAD $46.99
    Pre-Order Now
  • Robert Sorby

    6IN. TOOL REST CROSS BAR

    CAD $49.99
    7666 6" Tool Rest Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest...
    7666
    CAD $49.99
    Pre-Order Now
  • Robert Sorby

    9IN. TOOL REST CROSS BAR

    CAD $56.99
    7669 9" Tool Rest Cross Bar - Robert Sorby Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can...
    7669
    CAD $56.99
    Add to Cart
  • Robert Sorby

    9IN. INTERNAL BOWL REST

    CAD $59.99
    767 9" Internal Bowl Crossbar Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the...
    767
    CAD $59.99
    Add to Cart
  • Robert Sorby

    GOUGE SPINDLE FINGERNAIL 3/8IN. SORBY

    CAD $59.99
    Fingernail Profile Gouges - 3/8" - Spindle Gouge (Regular Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground finger-nail profile, which is not only safe in use, but also allows the...
    840FH38
    CAD $59.99
    Add to Cart
  • CHISEL PARTING TOOL 1/8IN. H.S.S. SORBY

    Robert Sorby

    CHISEL PARTING TOOL 1/8IN. H.S.S. SORBY

    Now: CAD $61.99
    Was: $64.99
    830H18 1/8" H.S.S Parting Tool Chisel - Robert Sorby 1/8" Parting Tool (Standard) 17" Long High Speed Steel
    830H18
    Now: CAD $61.99
    Was: $64.99
    Add to Cart
  • GOUGE SPINDLE FINGERNAIL 1/2IN. SORBY

    Robert Sorby

    GOUGE SPINDLE FINGERNAIL 1/2IN. SORBY

    Now: CAD $67.99
    Was: $74.99
    Fingernail Profile Gouges - 1/2" - Spindle Gouge (Regular Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground finger-nail profile, which is not only safe in use, but also allows the...
    840FH12
    Now: CAD $67.99
    Was: $74.99
    Add to Cart
  • BOX SCRAPPER HSS 3/4IN. ROBERT SORBY

    Robert Sorby

    BOX SCRAPPER HSS 3/4IN. ROBERT SORBY

    Now: CAD $74.99
    Was: $79.99
    ÿþ829H 3/4" Box Scraper - Robert Sorby The special cutting profile of this new scraper makes it ideal for cutting the parallel side walls of end grain boxes. The small radius on the point at the bottom of the cutting section creates a smooth...
    829H
    Now: CAD $74.99
    Was: $79.99
    Add to Cart
  • HOLLOWING TOOL 20IN. L 12IN. HL SORBY

    Robert Sorby

    HOLLOWING TOOL 20IN. L 12IN. HL SORBY

    CAD $77.99
    Hollowing Tool 20" By Robert Sorby H.S.S. Designed specifically for those who wish to make hollow forms or vases Handle length: 12" Replacement Cutter model 851C
    855H
    CAD $77.99
    Add to Cart
  • WOODTURNING TOOLS CURVED SCRAPER SORBY

    Robert Sorby

    WOODTURNING TOOLS CURVED SCRAPER SORBY

    Now: CAD $79.99
    Was: $85.00
    Curved Scraper - Robert Sorby The curved end profile makes this excellent for creating, smoothing and blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an aggressive cut, whilst retaining...
    828H
    Now: CAD $79.99
    Was: $85.00
    Add to Cart
  • PARTING TOOL 2MM FLUTED SORBY

    Robert Sorby

    PARTING TOOL 2MM FLUTED SORBY

    CAD $95.00
    2 mm Parting Tool Fluted 18" long Used with flute downwards. This tool gives an exceptionally good finish even when parting through end grain. Sides taper ground for clearance. High Speed Steel
    832H2M
    CAD $95.00
    Add to Cart
  • CHISEL ROUGHING GOUGE OUT 3/4IN.

    Robert Sorby

    CHISEL ROUGHING GOUGE OUT 3/4IN.

    CAD $105.00
    3/4'' Roughing Out Gouge An essential tool for between centre (spindle) work. This tool will quickly turn down square timber to round. The nose being ground square across, allows all the edge to be utilized. All roughing out to spindle work can be...
    843H34
    CAD $105.00
    Add to Cart
  • GOUGE BOWL FINGERNAIL LONG HANDLE 3/8IN.

    Robert Sorby

    GOUGE BOWL FINGERNAIL LONG HANDLE 3/8IN.

    CAD $105.00
    Fingernail Profile Gouges 3/8" Bowl Gouge (Long Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground fingernail profile, which is not only safe in use, but also allows the turner to...
    842FLH38
    CAD $105.00
    Add to Cart
  • THREAD CUTTER 16TPI C/W HANDLE SORBY

    Robert Sorby

    THREAD CUTTER 16TPI C/W HANDLE SORBY

    Now: CAD $105.00
    Was: $115.00
    Thread Cutter - 16TPI Cutting tools have been produced in 10, 16 and 20 thread per inch, with a unique, enhanced helix angle specially designed for use in wood to compliment these excellent tools. A Relief Cutting Tool Support Rest makes...
    890H16
    Now: CAD $105.00
    Was: $115.00
    Pre-Order Now
  • HOLLOWMASTER 3/4IN. SHANK SORBY

    Robert Sorby

    HOLLOWMASTER 3/4IN. SHANK SORBY

    Now: CAD $109.00
    Was: $125.00
    by "Robert Sorby" of England Hollow Master 3pc Set H.S.S. A full 3/4" surface gives ample support and prevents the tool from turning over Comes with a swiveling hollowing cutter and a full round scraper cutter Total length: 21" RS230C Replacement...
    RS230KT
    Now: CAD $109.00
    Was: $125.00
    Pre-Order Now
  • GOUGE BOWL FINGERNAIL LONG HANDLE 1/2IN.

    Robert Sorby

    GOUGE BOWL FINGERNAIL LONG HANDLE 1/2IN.

    Now: CAD $119.00
    Was: $129.00
    842FLH12 Bowl Gouge by Robert Sorby- 1/2" - 23" Length Deep fluted to allow heavy cuts to be taken. This tool is used over on its side (about 15-20m off the vertical) with the flute pointing in the direction of the cut. It is important to let the...
    842FLH12
    Now: CAD $119.00
    Was: $129.00
    Add to Cart
  • CHISEL PEN TURNING SET 3 PC SORBY

    Robert Sorby

    CHISEL PEN TURNING SET 3 PC SORBY

    Now: CAD $139.00
    Was: $155.00
    High Speed Steel 3 pc Pen Turning Set Set Contains: -5 /16" roughing gouge, (model # 866H) -1/16" parting tool, (model # 865H) -1 /2" spindle master, (model # 879H) (All chisels are 10" long)
    36HS
    Now: CAD $139.00
    Was: $155.00
    Add to Cart
  • CHISEL GOUGES ROUGHING OUT 1 1/4IN. SORBY

    Robert Sorby

    CHISEL GOUGES ROUGHING OUT 1 1/4IN. SORBY

    Now: CAD $142.50
    Was: $149.00
    1 1/4'' Roughing Out Gouge By Robert Sorby H.S.S. An essential tool for between centre (spindle) work. This tool will quickly turn down square timber to round. The nose being ground square across, allows all the edge to be utilized. All roughing out...
    843LH114
    Now: CAD $142.50
    Was: $149.00
    Add to Cart
  • SORBY TURNMASTER WITH 3 HSS CUTTERS

    Robert Sorby

    SORBY TURNMASTER WITH 3 HSS CUTTERS

    Now: CAD $165.00
    Was: $185.00
    RSTMHT123 TurnMaster Handled with Detail Point, Round and Square High Speed Steel Cutters - Robert Sorby FEATURES: 3 HSS Cutters; Detail Point, Round and Square All cutters interchangeable with one tool Indexable, patented cutting head for shear...
    RSTMHT123
    Now: CAD $165.00
    Was: $185.00
    Add to Cart
  • SORBY TURNMASTER WITH CARBIDE CUTTERS

    Robert Sorby

    SORBY TURNMASTER WITH 3 CARBIDE CUTTERS

    Now: CAD $185.00
    Was: $209.00
    RSTMHCT123 TurnMaster Handled with Detail Point, Round and Square Tungsten Carbide Cutters - Robert Sorby FEATURES: 3 Tungsten Carbide Cutters; Detail Point, Round and Square All cutters interchangeable with one tool Indexable, patented cutting head...
    RSTMHCT123
    Now: CAD $185.00
    Was: $209.00
    Pre-Order Now
  • Robert Sorby

    SOVEREIGN SPIRALLING AND TEXTURING SET

    Now: CAD $449.00
    Was: $499.00
    SOV3370DBS Robert Sorby - Woodturning Tools - SOVEREIGN system - spiralling & texturing tool set For decorative woodturning this set is an absolute must. Featuring the full size and modular micro systems, these tools with their varied cutters will...
    SOV3370DBS
    Now: CAD $449.00
    Was: $499.00

Woodworking Lathes


Busy Bee Tools is your source for woodworking lathes and the woodworking tools you need to completely outfit your shop. We stock quality Craftex wood lathes in sizes that can handle any job. Our selection features models with large turning capacities, variable speed controls and displays. Our in-house Craftex brand is famous for its heavy-duty cast-iron construction and generous 2 year warranty. Check out our Delta wood lathes, as well as benchtop lathes that give every woodworker the versatility he needs to handle all types of jobs, no matter how big or small.

You can count on Busy Bee Tools for a complete assortment of woodworking tools and supplies to compliment our woodworking lathes. Find the woodworking chisels and clamps you need to give your work the intricate detail that makes it stand apart from mass-produced items. You'll find the woodworking supplies you need to handle any job.

If there are any items you need but can't find on our Web site, let us know and we'll get them for you at the lowest possible price.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley