Wood Lathes

Wood Lathes

  • ONEWAY

    JUMBO JAWS FOR ONEWAY STRONGHOLD CHUCK

    CAD $103.00
    2136 These jaws are aluminum plates machined from a solid (for greater strength). Their unique combination of slots and tapped holes for mounting the rubber grippers allows holding an infinite number of round, oval or square shapes. The buttons are hard...
    2136
    CAD $103.00
    Pre-Order Now
  • CHISEL ROUGHING GOUGE OUT 3/4IN.

    Robert Sorby

    CHISEL ROUGHING GOUGE OUT 3/4IN.

    CAD $105.00
    3/4'' Roughing Out Gouge An essential tool for between centre (spindle) work. This tool will quickly turn down square timber to round. The nose being ground square across, allows all the edge to be utilized. All roughing out to spindle work can be...
    843H34
    CAD $105.00
    Add to Cart
  • GOUGE BOWL FINGERNAIL LONG HANDLE 3/8IN.

    Robert Sorby

    GOUGE BOWL FINGERNAIL LONG HANDLE 3/8IN.

    CAD $105.00
    Fingernail Profile Gouges 3/8" Bowl Gouge (Long Handle) There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground fingernail profile, which is not only safe in use, but also allows the turner to...
    842FLH38
    CAD $105.00
    Add to Cart
  • THREAD CUTTER 16TPI C/W HANDLE SORBY

    Robert Sorby

    THREAD CUTTER 16TPI C/W HANDLE SORBY

    Now: CAD $105.00
    Was: $115.00
    Thread Cutter - 16TPI Cutting tools have been produced in 10, 16 and 20 thread per inch, with a unique, enhanced helix angle specially designed for use in wood to compliment these excellent tools. A Relief Cutting Tool Support Rest makes...
    890H16
    Now: CAD $105.00
    Was: $115.00
    Pre-Order Now
  • HOLLOWMASTER 3/4IN. SHANK SORBY

    Robert Sorby

    HOLLOWMASTER 3/4IN. SHANK SORBY

    Now: CAD $109.00
    Was: $125.00
    by "Robert Sorby" of England Hollow Master 3pc Set H.S.S. A full 3/4" surface gives ample support and prevents the tool from turning over Comes with a swiveling hollowing cutter and a full round scraper cutter Total length: 21" RS230C Replacement...
    RS230KT
    Now: CAD $109.00
    Was: $125.00
    Pre-Order Now
  • JUMBO JAWS IN 4 3/4IN. 12 EX 2 3/4IN. 11.0IN.

    ONEWAY

    JUMBO JAWS IN 4 3/4IN. 12 EX 2 3/4IN. 11.0IN.

    CAD $115.00
    Jumbo Jaws For Model B1821 "One Way" 4 Jaw Safety Scroll Chuck Holding Dimensions: External chucking Minimum: 2 3/4" Maximum: 11" Optional Holding Dimensions: Internal chucking Minimum: 4 3/4" Maximum: 12" Made in Canada
    B1821JJ
    CAD $115.00
    Add to Cart
  • GOUGE BOWL FINGERNAIL LONG HANDLE 1/2IN.

    Robert Sorby

    GOUGE BOWL FINGERNAIL LONG HANDLE 1/2IN.

    Now: CAD $119.00
    Was: $129.00
    842FLH12 Bowl Gouge by Robert Sorby- 1/2" - 23" Length Deep fluted to allow heavy cuts to be taken. This tool is used over on its side (about 15-20m off the vertical) with the flute pointing in the direction of the cut. It is important to let the...
    842FLH12
    Now: CAD $119.00
    Was: $129.00
    Add to Cart
  • CHUCK 4IN. WOODTURNING O TYPE

    CHUCK 4IN. WOODTURNING O TYPE

    Now: CAD $125.00
    Was: $165.00
    4" Wood Chuck "O Type" Spindle size: 1" - 8 TPI Internal chucking: 2" - 3" External chucking: 1 1/2" - 2" Included 4 extra jaws giving internal chucking to 3/4", 1 1/4" and 1 3/4" Also includes wood screw
    B2545
    Now: CAD $125.00
    Was: $165.00
    Add to Cart
  • CHISEL PEN TURNING SET 3 PC SORBY

    Robert Sorby

    CHISEL PEN TURNING SET 3 PC SORBY

    Now: CAD $139.00
    Was: $155.00
    High Speed Steel 3 pc Pen Turning Set Set Contains: -5 /16" roughing gouge, (model # 866H) -1/16" parting tool, (model # 865H) -1 /2" spindle master, (model # 879H) (All chisels are 10" long)
    36HS
    Now: CAD $139.00
    Was: $155.00
    Add to Cart
  • CHISEL SET DELUXE HSS FOR LATHE 6PCS

    Woodstock

    CHISEL SET DELUXE HSS FOR LATHE 6PCS

    Now: CAD $139.00
    Was: $175.00
    D2304 6 Pc. Deluxe HSS Lathe Chisel Set For serious wood turners, this Deluxe Lathe Chisel Set features beefy ash handles for unsurpassed control, brass ferrules and high speed steel blades. Includes: 15/16" x 17" Parting Tool, 13/16" x 17" Round Nose...
    D2304
    Now: CAD $139.00
    Was: $175.00
    Pre-Order Now
  • CHISEL GOUGES ROUGHING OUT 1 1/4IN. SORBY

    Robert Sorby

    CHISEL GOUGES ROUGHING OUT 1 1/4IN. SORBY

    Now: CAD $142.50
    Was: $149.00
    1 1/4'' Roughing Out Gouge By Robert Sorby H.S.S. An essential tool for between centre (spindle) work. This tool will quickly turn down square timber to round. The nose being ground square across, allows all the edge to be utilized. All roughing out...
    843LH114
    Now: CAD $142.50
    Was: $149.00
    Add to Cart
  • CHISEL WOOD TURNING 6 PC SET

    CHISEL WOOD TURNING 6 PC SET B2351

    Now: CAD $149.00
    Was: $165.00
    6pc Deluxe Lathe Turning Tools High Speed Steel Large ash handles Brass ferrules Includes: 3/16" x 13/16" Parting tool -17" long 13/16" Round nose scraper - 17" long 7/16" Gouge - 17" long 1 1/8" Skew - 19" long 1" Gouge - 19" long 1/2" Gouge - 22 1/2"...
    B2351
    Now: CAD $149.00
    Was: $165.00
    Pre-Order Now
  • Easy Wood

    EASY WOOD MID SIZE DETAILER

    Now: CAD $149.00
    Was: $159.00
    B3688 The Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit. The Easy Detailer...
    B3688
    Now: CAD $149.00
    Was: $159.00
    Add to Cart
  • Easy Wood

    EASY WOOD MID SIZE FINISHER

    Now: CAD $149.00
    Was: $159.00
    B3687 With another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger...
    B3687
    Now: CAD $149.00
    Was: $159.00
    Add to Cart
  • Easy Wood

    EASY WOOD MID SIZE ROUGHER

    Now: CAD $149.00
    Was: $159.00
    B3686 Easy-to-use, effective and no need for sharpening carbide insert. The cutter is both rotatable and replaceable with just one screw. The Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other...
    B3686
    Now: CAD $149.00
    Was: $159.00
    Add to Cart
  • OUTBOARD EXTENSION FOR CX802

    Craftex CX Series

    OUTBOARD EXTENSION FOR CX802

    CAD $149.00
    ÿþCX802EXT Outboard Extension for CX802 Wood Lathe This outboard extension can be installed on the cast iron stand of your  CX802 wood lathe and used to turn bowls approximately 30". Includes Bed Extension, Banjo, Post, and mounting hardware.
    CX802EXT
    CAD $149.00
    Add to Cart
  • Easy Wood

    EASY WOOD FULL SIZE FINISHER

    Now: CAD $159.00
    Was: $174.00
    B3691 With another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger...
    B3691
    Now: CAD $159.00
    Was: $174.00
    Add to Cart
  • SORBY TURNMASTER WITH 3 HSS CUTTERS

    Robert Sorby

    SORBY TURNMASTER WITH 3 HSS CUTTERS

    Now: CAD $165.00
    Was: $185.00
    RSTMHT123 TurnMaster Handled with Detail Point, Round and Square High Speed Steel Cutters - Robert Sorby FEATURES: 3 HSS Cutters; Detail Point, Round and Square All cutters interchangeable with one tool Indexable, patented cutting head for shear...
    RSTMHT123
    Now: CAD $165.00
    Was: $185.00
    Add to Cart
  • EXTENSION FOR CX801 BENCH TOP LATHE

    Craftex CX Series

    EXTENSION FOR CX801 BENCH TOP LATHE

    CAD $169.00
    CX801EXT Extension for CX801 Benchtop Lathe This extension table extends the distance between the centers of the lathe up to 38" giving you a full size lathe. Made of solid cast iron for heavy duty and stable control while turning. A great addition for...
    CX801EXT
    CAD $169.00
    Add to Cart
  • SORBY TURNMASTER WITH CARBIDE CUTTERS

    Robert Sorby

    SORBY TURNMASTER WITH 3 CARBIDE CUTTERS

    Now: CAD $185.00
    Was: $209.00
    RSTMHCT123 TurnMaster Handled with Detail Point, Round and Square Tungsten Carbide Cutters - Robert Sorby FEATURES: 3 Tungsten Carbide Cutters; Detail Point, Round and Square All cutters interchangeable with one tool Indexable, patented cutting head...
    RSTMHCT123
    Now: CAD $185.00
    Was: $209.00
    Pre-Order Now
  • CHUCK SET FOR WOOD LATHE

    CHUCK SET FOR WOOD LATHE

    Now: CAD $259.00
    Was: $329.00
    B3184 Chuck Set for Wood Lathe This wood lathe chuck set includes a four jaw self-centering chuck and interchangeable jaws for spindles, bowls and work-pieces that are hard to be secured. This chuck set will fit 1" x 8 tpi spindle. Includes: Four...
    B3184
    Now: CAD $259.00
    Was: $329.00
    Add to Cart
  • CHISEL WOODTURNING TOOL 5PC SET SORBY

    CHISEL WOODTURNING TOOL 5PC SET SORBY

    Now: CAD $279.00
    Was: $299.00
    52HS Professional Wood Turning Chisel Set Standard set of 5pcs 1 - 3/4'' Roughing Gouge 1 - 3/8'' Spindle Gouge 1 - 1/2" Round Nose Scraper 1 - 1/2" Skew Chisel 1 - 1/8'' Parting Tool Approx. Length: 14'' Overall Length
    52HS
    Now: CAD $279.00
    Was: $299.00
    Add to Cart
  • WOOD LATHE CHUCK SET 3.75IN.

    Now: CAD $299.00
    Was: $379.00
    B3615 3.75" Chuck Set for Wood Lathe This wood lathe chuck set includes a four jaw self-centering chuck and interchangeable jaws for spindles, bowls and work-pieces that are hard to be secured. This chuck set will fit 1" x 8 tpi spindle...
    B3615
    Now: CAD $299.00
    Was: $379.00
    Add to Cart
  • WOOD LATHE CHUCK SET 4.5IN.

    Now: CAD $379.00
    Was: $449.00
    B3616 4.5" Chuck Set for Wood Lathe This wood lathe chuck set includes a four jaw self-centering chuck and interchangeable jaws for spindles, bowls and work-pieces that are hard to be secured. This chuck set will fit 1" x 8 tpi spindle. Includes: Four...
    B3616
    Now: CAD $379.00
    Was: $449.00
    Pre-Order Now
  • CHISEL TRNG 8PC SET BOWL AND SPNDL SORBY

    CHISEL TRNG 8PC SET BOWL AND SPNDL SORBY

    Now: CAD $599.00
    Was: $649.00
    82HS Professional Wood Turning Chisel Set Standard set of 8pc: 1 - 3/4" Roughing Gouge 1 - 1/4'' Spindle Gouge 1 - 1/2" Spindle Gouge 1 - 3/8" Bowl Gouge 1 - 1/2" Round Nose Scraper 1 - 1" Square Nose Scraper 1 - 3/4" Skew Chisel 1- 3-16" Parting...
    82HS
    Now: CAD $599.00
    Was: $649.00
    Add to Cart

Woodworking Lathes


Busy Bee Tools is your source for woodworking lathes and the woodworking tools you need to completely outfit your shop. We stock quality Craftex wood lathes in sizes that can handle any job. Our selection features models with large turning capacities, variable speed controls and displays. Our in-house Craftex brand is famous for its heavy-duty cast-iron construction and generous 2 year warranty. Check out our Delta wood lathes, as well as benchtop lathes that give every woodworker the versatility he needs to handle all types of jobs, no matter how big or small.

You can count on Busy Bee Tools for a complete assortment of woodworking tools and supplies to compliment our woodworking lathes. Find the woodworking chisels and clamps you need to give your work the intricate detail that makes it stand apart from mass-produced items. You'll find the woodworking supplies you need to handle any job.

If there are any items you need but can't find on our Web site, let us know and we'll get them for you at the lowest possible price.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley