null

Milling

Milling

  • KNEE MILL VERTICAL CRAFTEX CX SERIES

    Craftex CX Series

    KNEE MILL VERTICAL CRAFTEX CX SERIES CX603

    Now: CAD $5,899.00
    Was: $6,999.00
    CX603 1-1/2 HP Knee Milling Machine - Craftex CX-Series This heavy duty knee mill has the power and space to make quick and accurate work of just about any machining job you can throw at it. Equipped with a 1-1/2 HP motor, a 8" x 30" work table and...
    CX603
    Now: CAD $5,899.00
    Was: $6,999.00
    Add to Cart
  • MILLING MACHINE WITH DIGITAL READOUT

    Craftex CX Series

    MILLING MACHINE WITH DIGITAL READOUT CX601

    Now: CAD $2,999.00
    Was: $3,399.00
    CX601 Mill / Drill with Digital Readout - Craftex CX-Series Having most of the features found on larger machines, the CX601 Mill/Drill is a fine addition to your shop. The 33-1/16" x 8-1/4" table provides a large work space and the T-slots allow...
    CX601
    Now: CAD $2,999.00
    Was: $3,399.00
    Pre-Order Now
  • Craftex CX Series

    LATHE/MILL COMBINATION 110V 3/4HP 60HZ CX615

    Now: CAD $2,949.00
    Was: $3,299.00
    CX615 16" x 20" Mill Lathe Combination This combination Mill Lathe is an excellent machine for any metalworker, from the hobbyist to the veteran machinist. Not only will it save space in your shop, but it has the features to allow you to tackle a wide...
    CX615
    Now: CAD $2,949.00
    Was: $3,299.00
    Pre-Order Now
  • MILLING MACHINE DIGITAL READOUT R8 CX600

    Craftex CX Series

    MILLING MACHINE DIGITAL READOUT R8 CX600

    Now: CAD $1,999.00
    Was: $2,399.00
    CX600 Mill Drill with R8 Taper and Digital Readout – Craftex CX-Series While the CX600 measures in a bit smaller than its big brother, the CX601, the CX600 has almost all the same great features. This machine features a powerful 3/4HP motor,...
    CX600
    Now: CAD $1,999.00
    Was: $2,399.00
    Pre-Order Now
  • Craftex CX Series

    MILLING MACHINE MINI CRAFTEX CSA CX605

    Now: CAD $999.00
    Was: $1,309.00
    CX605 Mini Milling Machine - Craftex CX-Series The CX605 is a small, high accuracy and affordable milling and drilling machine. It features a 1/2 HP motor and has a maximum milling capacity of 5/8" and drilling capacity of 1/2". The precision ground...
    CX605
    Now: CAD $999.00
    Was: $1,309.00
    Add to Cart
  • ROTARY TABLE 6IN. C/W TAIL STOCK/INDEXING

    ROTARY TABLE 6IN. C/W TAIL STOCK/INDEXING B2485

    Now: CAD $509.00
    Was: $575.00
    6" Rotary Table, Horizontal/Vertical Fine grade cast iron Precision ground hardened worm Ratio: 90:1 360degree graduations Comes with Index Plates and Tail Stock
    B2485
    Now: CAD $509.00
    Was: $575.00
    Add to Cart
  • STAND FOR MILLING MACHINE CX600

    Craftex CX Series

    STAND FOR MILLING MACHINE CX600 CX600ST

    CAD $299.00
    CX600ST  Optional Stand for CX600 Mill / Drill - Craftex CX-Series  Featuring heavy gauge welded steel construction this optional stand is designed for CX600 Mill / Drill. The stand is 14-3/4" in length and features a storage cabinet with a...
    CX600ST
    CAD $299.00
    Pre-Order Now
  • Craftex CX Series

    5IN. PRECISION MACHINE VISE CRAFTEX CX

    Now: CAD $135.00
    Was: $159.00
    CXVISE1 This Accu-lock machine vise is ideal for heavy duty precision milling & drilling applications and features as swivel base, perfectly aligned, precision ground jaws and vise accuracy (parallelism & square) of 0.025mm/100mm. This high quality vise...
    CXVISE1
    Now: CAD $135.00
    Was: $159.00
    Add to Cart
  • SPIN INDEX 5 C

    SPIN INDEX 5 C

    Now: CAD $129.00
    Was: $139.00
    5C-Spin Index Features And Mechanism: The indexing plate has 36 holes at 10" intervals, so permitting the dividing into 2, 3, 4, 6, 8, 12, 18 or 36 parts. Method Of Using Vernier Holes Example: Index 32o First place in 0o position of front plate and...
    B049
    Now: CAD $129.00
    Was: $139.00
    Add to Cart
  • Craftex CX Series

    4IN. TILTING MACHINE VISE CRAFTEX CX SERIE

    Now: CAD $125.00
    Was: $149.00
    CXVISE2 This precision tilting machine vise is made from high quality cast iron construction and features a vise accuracy (parallelism & square) of 0.025mm/100mm. Features a 360° swivel rotating base and can be tilted in any position from 0° -...
    CXVISE2
    Now: CAD $125.00
    Was: $149.00
    Add to Cart
  • MILLING VISE LOW PROFILE 1 7/8IN.

    MILLING VISE LOW PROFILE 1 7/8IN.

    Now: CAD $89.99
    Was: $109.00
    B2715 Precision Tool Makers Vise This high precision toolmakers vise is manufactured from hardened 55-60 HRC tool steel & is high precision ground. The vise has recessed pockets at both ends for clamping. Ideal for milling machines and mini mills like...
    B2715
    Now: CAD $89.99
    Was: $109.00
    Add to Cart
  • STEEL SQUARE SET 4 PC: 2IN. 3IN. 4IN. AND 6IN.

    Groz

    STEEL SQUARE SET 4 PC: 2IN. 3IN. 4IN. AND 6IN.

    Now: CAD $24.99
    Was: $42.99
    4pc Steel Square Set Made by "GROZ" Sizes: 2", 3", 4" & 6" Hardened spring steel fixed to the stock with tapered self-locking rivets Blade and stock precision ground Working edges of the blade are lapped to increased accuracy
    B2582
    Now: CAD $24.99
    Was: $42.99
    Add to Cart
  • 1 2 3 BLOCK

    1 2 3 BLOCK

    Now: CAD $23.99
    Was: $25.99
    Precision Ground 1-2-3 Blocks A must for a good machine shop Very handy for precision layout work| Hardened and ground surface. Blocks are matched to .0001" per inch Measures: 1" x 2" x 3"
    B653
    Now: CAD $23.99
    Was: $25.99
    Add to Cart
  • SLITTING SAW 3 X 1/16

    SLITTING SAW 3 X 1/16

    CAD $20.99
    T747055 3" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 3" Thickness: 1/16"
    T747055
    CAD $20.99
    Add to Cart
  • STUB ARBOR MT 3 X 1IN.

    Groz

    STUB ARBOR MT 3 X 1IN. B461

    CAD $16.99
    MT Arbor With Straight Stub We have specially ordered these for applications where regular tapered and hardened arbor cannot be used. However, the straight shank portion is soft. Hence, they can be machined to adapt for special applications. Taper...
    B461
    CAD $16.99
    Add to Cart
  • STUB ARBOR MT 2 X 1IN.

    Groz

    STUB ARBOR MT 2 X 1IN.

    CAD $14.99
    MT Arbor With Straight Stub We have specially ordered these for applications where regular tapered and hardened arbor cannot be used. However, the straight shank portion is soft. Hence, they can be machined to adapt for special applications. Taper...
    B460
    CAD $14.99
    Add to Cart

Milling Machines, Mini Mills & Accessories

Our selection of horizontal milling machines and vertical milling machines provides the choices you can count on for reliable machinery that gets the job done. We carry a variety of sizes depending on project requirements, including drilling and boring.

These high-tech cutting tools provide precision control, giving you the results you expect. Our quality drilling and turning machines include a manufacturer's warranty, allowing you to work with confidence.

We carry several quality mini milling machines that offer great drilling, milling and facing capacity for their compact size. These Craftex machines also include the safety features you expect, for your peace of mind.

In need of a full size mill? Craftex has you covered with milling machines and knee mills that can process your largest machining projects with superior precision. Plus, each powerful tool comes with a three-year warranty that protects your investment.

Milling accessories can give you more versatility in your machining projects. Busy Bee Tools carries metal milling bits, milling machine parts, sleeves and other milling equipment so you can take on any project you can think up.

Consider these milling accessories:

Discover extraordinary precision and convenient operation by pairing a Craftex Milling Machine with the right accessories for your job.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley