Jigs

This aluminum mitre gauge has all the features of a great crosscutting aid. It has adjustable stops at both 45° marks and many detents along the gauge to quickly select cutting angles. There is also an adjustable zero scale to help you dial the...

This Taper Jig was made with a durable aluminum construction and has a built in scale and is fully adjustable. It is also equipped with a backside stop to hold your material in place. Taper jig can be setup and assembled for either right or left hand use...

This miter gauge with extendable fence is made from die cast aluminum and is simple to adjust to any angle between 0° and 60° as needed. Another great feature is the anodized alloy fence that is fitted with an adjustable length stop for...

K4MS  Kreg Jig Master System  The Kreg Jig Master System is the ultimate Pocket-Hole Jig on the market, and a great choice for any woodworking enthusiast. Between its solid clamp, large clamping recess, Dust-Collection Attachment, Material...

1321 Pocket Jig100 - MILESCRAFT The PocketJig100 allows you to connect your work pieces in a quick and timely manner or do repairs around your house. Small, compact design allows you to do applications where a small jig is required. Built in board...

KMS7520 Track Clamp - KREG Track Clamps from Kreg make perfect companions to the Accu-Cut Circular Saw Guide Track System. These easy to use clamps lock into place on the underside of the Accu-Cut track and starting block to offer additional holding...

KPC1040 Custom Plug Cutting Bit Miro - KREG Creates plugs that fit Micro Pocket Kreg Jig® pocket holes Positive stop collar ensures perfect drilling depth to produce accurately sized plugs Open design and enlarged inside diameter provide...

B3263 ALUMINUM MITER TRACK 36" 36" Aluminum Miter Track that works with standard 3/4" x 3/8" miter gauges with or without T-slot. Slides into miter track or miter slot on your table saw and can be used on table saw extensions, drill press tables &...

KHISLIDE Drawer Slide Jig - KREG Install Drawer Slides the Fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly Accurate slide positioning with built-in indexing tabs Repeatable results without measuring and marking Versatile for...

KHIHINGE Concealed Hinge Jig - KREG Install Drawer Slides the Fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly Make cabinet door installation easy! Get drill press accuracy with any hand drill. Accurate hinge positioning...

KHIBIT 35mm Concealed Hinge Jig Bit - KREG Bore Clean, Perfect Holes for Concealed Door Hinges The 35mm Concealed Hinge Bit makes it possible to bore clean, perfect holes for concealed hinges. The bit is a direct replacement for the bit that's...

KHIPULL Cabinet Hardware Jig - KREG Install Knobs and Pulls the Worry-Free Way - with Easy, Repeatable Accuracy Adjustable guides for accurate hole placement Built-in measuring scales for repeatable results  Versatile for mounting single and...

1221 Pantograph Pro - Milescraft Enjoy Expanded 2D Sign/Design Making Capabilities without the Limitations of Router Templates The Milescraft PantographPRO™ lets you expand your routers capabilities with fingertip control. Quickly connect /...

B3262 32" Aluminum Miter Track Works with standard 3/4" x 3/8" miter gauges with or without T-slot Slides into miter track or miter slot on your table saw Use on table saw extensions, drill press tables & band saw tables Features 5 pre-drilled holes

K5MS Kreg Jig K5 - KREG Front-mounted handle makes clamping easy Ratcheting clamp mechanism adjusts without tools Storage wings provide built-in storage for bits and accessories Swiveling dust collection port accepts any standard vacuum hose Adjustable...

PRS3010 Feather Board Single Pack - KREG TOOLS Made of extremely durable plastic composite body, this feather board is designed to provide consistent and optimum pressure resulting perfect cuts and safe operation. It features a wedge lock system which...

K4 K4 Kreg Jig - Kreg Jig Perfect for do-it-yourselfers and anyone new to Kreg Joinery Removable Drill Guide for benchtop and portable use For use with materials from 1/2" to 11/2" thick (12-38mm) Hardened-steel Kreg® drill guides feature...

If you don't cut mortises all that often and have a drill press, then this tool is just what you need. This mortising attachment and chisel set for your drill press allows you to double-task a machine you likely already have. Made from cast iron and...

1400 Milescraft Saw Guide With 3 separate bars and 1/16" adjustment, it fits almost all circular and jig saws. It has pivot points for circle cutting

24" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs. Each hold-down includes a knob and 1/4"-20 sliding bolt. Hold-downs...

500-pk, 1-1/4" No.8 Coarse Pocket Hole Screw with Washer Head - KREG The Kreg 1-1/4-Inch #8 Coarse Pocket Hole Screws with Washer-Head prevents overdriving in pocket bottoms, which is especially critical in composite and plywood work pieces. The...

36" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs. Each hold-down includes a knob and 1/4"-20 sliding bolt. Hold-downs...

Electronic Edge Finder - GROZ This edge finder is an accurate and time saving tool for precisely locating work edges, shoulders, grooves etc. Ideal for use on both conventional and CNC equipment. The edge finder lights up instantly when the stylus...

DECKDRIVER Deck Jig Driver Bit Set - KREG This hardened steel driver bit features a KTX / #1 square tip for positive bit engagement and a quick change compatible shank. It was designed specifically for use with the Kreg Deck Jig. Comes complete with...

K5 Pocket Hole Jig System - KREG Front-mounted clamp handle makes clamping easy Ratcheting clamp mechanism adjusts without tools Quick-release pin holds drill block in place, and can t get lost Storage Wings provide built-in storage for bits,...

INCRA MITER SLIDER 24" This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners. - A simple turn of a screw adjust Miter Slider for ZERO...

D6X2 2pc 6" #2 Square Driver Bit for Kreg Pocket Hole Systems Versatile #2 square driver extension bits 6" long Compatible with virtually any drill that accepts exchangeable bits Provides the added length needed in certain drilling applications

KREG POCKET SCREWS - 2" #8 COARSE box of 50pcs MAXI-LOC FINE The Maxi-Loc series is the standard for hardwood to hardwood applications. Large washer head provides a superior hold in the bottom of the pocket. KREG self tapping screws feature a self...

INCRA MITER SLIDER 18" This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners. - A simple turn of a screw adjust Miter Slider for ZERO...

KREG Feather Board Twin Pack The True-FLEXO Feather Board gets its name from the careful engineering that went into its design. Many featherboards on the market today apply too much pressure or not enough pressure to the workpiece, resulting in...

Utility Track 36" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount

Shelf Pin Drilling Jig Perfectly aligned holes 1" apart Self-centering bit included 37 or 64mm from edge Approx. 18" long

KREG PRECISON TRAK & STOP KIT Cutting wood with accuracy is an important part of making sure the project turns out just right. The inaccuracy of pencil marks on a board can then be compounded by the need to follow that mark precisely with the saw...

TTRACKPLUS36 36" T-Track Plus With Adjustable Lexan Scale - Incra Large T-Slot accepts standard 1/4-20 hex bolts and nutsAdjustable Lexanr scaleMount easily with pre-drilled holes and included fastenersHard anodized aluminum for durability

KREG POCKET SCREWS - 1 1/4" #7 FINE box of 500pcs MAXI-LOC FINE The Maxi-Loc series is the standard for hardwood to hardwood applications. Large washer head provides a superior hold in the bottom of the pocket. KREG self tapping screws feature a self...

Utility Track 12" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount

Hold Down T-Track Solid aluminum with large T-Knob fits any slot which holds the head of 1/4" - 20 bolt. Hold stock upto 2" thick.

MITER1000SE INCRA MITER GAUGE SPECIAL EDITION The Miter 1000 Special Edition builds on the excellent foundation provided by the Miter 1000. The Incra exclusive AngleLOCK Indexing System delivers 41 lock solid angle stops in 5-degree increments over a...

KJHD Jig Hd Pocket Hole for 1-1/2" Material - KREG Bigger bit, bigger holes, bigger screws, and of course bigger projects. Introducing the all-new Kreg Jig HD – delivering the strength and confidence you need to BUILD BIG! Designed with the same...

Utility Track 24" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount