Dust Collection Fittings

Transform your dust collection system with our Magnetic Dust Collection Connectors, designed to simplify and enhance your workshop's efficiency. These innovative connectors use the power of rare earth magnets to provide quick, secure, and effortless...

Simplify the integration of a dust collection system into any machine with our 2-1/2" OD Tapered Port. This versatile accessory is designed to make installation straightforward and quick. Just cut a 2-3/4" diameter hole in your machine and mount the...

T Plastic 4" - for Dust Collector

Elbow Plastic 4" - For Dust Collector

B3052 45 Degree Elbow Plastic 4" Unlike regular elbows, this 45 degree elbow allows you to fit into corners and tighter spaces, giving you more control over your dust collection.

Splice Plastic - 4" for Dust Collector

B3055 2-1/2" Plastic Y-Fitting Classic Y-Fitting now for 2-1/2" Hose Connect hose to your dust collector and spread at a 45 degree angle for ease of use in the shop.  Size: 2-1/2"

B3054 2-1/2" Plastic T-Fitting Classic T-Fitting now for 2-1/2" Hose Connect hose to your dust collector and spread at a 90 degree angle for ease of use in the shop. Size: 2-1/2”

Reducer Plastic 4" x 3 " - For Dust Collector

Reducer Plastic 3" - 2 1/2 " - For Dust Collector Elevate the functionality of your Dust Collector system with our premium Plastic Reducer, designed for seamless integration into your existing setup. This 3" to 2 1/2" Reducer is a time-tested solution,...

Y Plastic 4" - for Dust Collector

B2460D 45 Degree Elbows for Dust Collection Kit 2 1/2" Transparent Used for rigid pipeInner Diameter: 2-1/2"

2-1/2" Splice Fitting This splice connects 2-1/2" hard fittings together. It can be used with elbows, 45 degree y joints etc. Outer Diameter Size: 2-1/2" Is to be used with flex hose not rigid pipe/fittings  

4" Thru-Wall Port Kit makes it easy to keep your shop vacuum tucked away quietly in another room. Great for reducing the ambient noise in your shop by allowing the dust collection suction to pass through walls r ceilings. This kit includes two special...

2-1/2" Thru-Wall Port Kit makes it easy to keep your shop vacuum tucked away quietly in another room. Great for reducing the ambient noise in your shop by allowing the dust collection suction to pass through walls r ceilings. This kit includes two...

This 5 pc Precision Layout and Marking set is CNC machined with a precision ground measuring face for high accuracy and repeatability. The laser engraved scale with black lines against the sand blasted finish allow for easy reading. All gauges a...

This hood is designed to fit most 8-Inch, 10-Inch and 12-Inch contractor-type table saws. Mounted face down when in operation, they’re easily adapted to other woodworking machines as well. A popular accessory with contractor saws as they can be...

This hood is designed to fit most 8-Inch, 10-Inch and 12-Inch contractor-type table saws. Mounted face down when in operation, they’re easily adapted to other woodworking machines as well. A popular accessory with contractor saws as they can be...

4" Bell Style Dust Collection Fitting with bell shaped opening is perfect for open-air dust collection. This dust hood features a flanged opening on the left and right that is perfect for mounting to a larger machine cabinet. Features: 4-1/4" x 8-1/4"...

This handy 2.5” dust collection port is a perfect fit for your router table fence. Simply just add this to your router table fence to better control the dust thrown by the router bit and significantly improve the dust extraction on this tool...

This Eccentric Reducer provides a step-down from a larger main line to a smaller branch line. This step-down increases air velocity near the machine where it's needed the most. Please note that this item is not designed to fit directly to a machine's...

This Eccentric Reducer provides a step-down from a larger main line to a smaller branch line. This step-down increases air velocity near the machine where it's needed the most. Specifications: Reduce from 4" hose to 2-1/4" OD hoseOff center alignment...

B3824 Mini Gulp Dust Hood The Mini Gulp dust hood is Ideal for collecting dust and wood chips from operations like wood turning, power carving and sanding. Includes 4 mounting holes 3/8" diameter and a grid to prevent larger pieces from entering your...

AXH000001 If there's any tool in need of effective dust collection, it's your router. Chips are flying, dust is piling up, and you can barely see through cloud Finally, there's a solution that works for nearly any portable router! Easy to install and...

B3630 Y FITTING 4" X 2.5" X 2.5" Splitter for mating two 2.5" dust collection hoses to a single 4" diameter dust collection hose.

B3629 4" FLANGED INLET FITTING 5.5" diameter flanged fitting with pre-drilled holes for easy mounting. The fitting will accept 4" diameter dust collection hose.

B3628 2.5" FLANGED INLET FITTING 3.75" outside diameter flanged hose fitting for connection to 2.5" dust collection hose. Three pre-drilled holes in the flange rim for easy mounting. This item is suitable for attachment to smaller machinery,...

B3627 5" X 4" QUICK CONNECT REDUCER FITTING This quick connector reducer fitting is used to adapt a 4" dust collection hose to a 5" diameter collection hose. This connector Threaded for ease and secure mount of the 4" hose to the fitting.

B3626 5" QUICK CONNECT THREADED FITTING Used for connecting 5" dust collection hose to a 5" diameter collector port. This fitting is threaded for ease and secure mount of the hose to the fitting.

B3625 6" HOSE SPLICE FITTING This splice fitting is for connection of two 6" diameter dust collection hoses to each other.

B3624 DWV PVC PIPE TO 4" PORT FITTINGCoupling to attach standard 4" PVC pipe or dust collector port to 4" diameter dust collection hose.

B3623 2.5" 45 DEGREE ELBOW A45 degree hose union with male ends, to accommodate 2.5" dust collection hose, on both ends.

B3622 DUST PORT ADAPTOR 2.5" Dust port adapter for router tables. It has a 2.5" diameter hose connection to a 90 degree flange to attach to the router table fence.

B3592 3-WAY DUST COLLECTION JUNCTION Now you can add more tools to your dust collection system by splitting off your main line with this new 3-way Dust Collection Junction. All ends have a 4" outside diameter and a 3-3/4" inside diameter. Combine this...

D4249 4" x 2-1/4" Taper Adapter - Woodstock This fitting increases air velocity near the machine where its needed most. The tapered end allows for a snug press-on fit that can easily be removed if necessary. Specifications: Increase air velocity by...

D42372-1/2" Router Dust Port - WoodstockThis 2-1/4-inch Router Dust Port will collect chips and dust right at the router table.Specifications:Collect chips and dust right at the router tableEasily mounts to router table or shaper tablePort size measures...

D4236 2-1/2" Universal Adaptor - Woodstock This universal adapter provides a multitude of dust collection reducing options. Simply cut away unneeded steps with a hacksaw. Specifications: Reduce dust collection hose from 2-1/2" to 1" OD in 1-7/8",...

D42352-1/2" Elbow - WoodstockElbows are necessary whenever ductwork changes direction, such as from a dust collector to an overhead main line, or when connecting individual machines to branch lines.Specifications:90 degree elbowFits most larger...

B3202 4" Rubber Connector Made of thick, durable rubber Rubber creates secure connection Use to join 4" hose to 4" machine port Threaded end accepts 4"

B3107 2-1/2" Rubber Connector with Clamps This connector is made of thick, durable rubber and allows connecting hard fittings; pipes and machine ports together. The connector comes with two stainless steel gear clamps that when tightened, provides and...

B3106 4" Rubber Connector with Clamps This connector is made of thick, durable rubber and allows connecting hard fittings; pipes and machine ports together. The connector comes with two stainless steel gear clamps that when tightened, provides and...

B3050 6" Reducer to 4" Step down from a main 6" inlet to a single 4"

Dust Collection Basics - Book This concise 50-page book guides the reader through all the necessary steps in setting up his/her own central dust collection system. Simple and skillful, this book delivers a wide range of tips, hints, suggestions and...

W1044 Reducer Plastic - 4" - 2 1/2" - For Dust Collector

Reducer Plastic - Dust port fits over 3" hole, outlet diameter is 2 1/2" - For Dust Collector

Threaded Coupler Plastic - 3"

Threaded Coupler Plastic - 4"

Elbow Plastic - 4" with Flange

Table Saw Flange Plastic 4" - 6 1/4" x 6 1/4"

Floor Sweep 4" Plastic 21" wide for Dust Collector

Jointer Flange 4" Plastic - 8 1/2" x 10 1/4" - For Dust Collector & Jointers

Jointer Flange 4" Plastic - 8 1/4" x 8 1/4" - For Dust Collector & Jointers

5" to 4" Plastic Reducer It is designed for dust collection system assembly and connecting a 5" hose to a 4" hose. Size: 5" to 4"

5" Plastic Y-Fitting Classic Y-Fitting now for 5" Hose. Connect hose to you dust collector and spread at a 45 degree angle for ease of use in the shop. Size: 5"

2-1/2" - 4" Quick Change Connector with Threaded End This quick change connector allows you to connect a 2-1/4" hose to a 4" opening diameter by just pressing. The 2-1/4" threaded end can be attached to 2-1/4" hose without using a hose clamp. Saves you...

4" End Cap Dust Collection Accessory This 4" end cap is ideal for sealing openings on any 4" dust collection accessories such as elbows, y-connection, t-connections etc Wherever there may be an extra opening, now there is an inexpensive and secure way...

Dust collection adapter 1" to 4" A newer design to improve airflow, this provides a variety of step down/reducing options. Cut the unneeded portion to suit your application.

4" Coupler This coupler connects 4" hard fittings together. It can be used with elbows, 45 degree "Y" joints, tubing and etc. Size: 4"

Adapter 1" to 6" Dust Collection Accessory This 7-step adapter is a great option for reducing. Outside diameter step sizes include 1", 2", 2 1/2", 3", 4", 5" and 6" Unneeded steps can be easily cut away.

This dust hood measures 4" DIAMETER 10" X 4" Ideal for a variety of machines.

Router Table Dust Hood With this hood you can complete your router table fence for dust collection feature. Fits a 2 1/2" hose.

Dust Collector - "Y" Fitting (Plastic) Fit smaller hose to existing 4" system. Size: 4" - 2 1/2"

B2499 "Big Gulp" Dust Hood This huge 12 3/4" tall x 16" wide opening hood is ideal for collecting dust and wood chips from operations like wood turning, power carving and sanding. Large opening funnels to a 4" dia. fitting. Made of ABS plastic.

B2460G 90 degree Elbow for Dust Collection Kit 2 1/2" Transparent

B2460E "T" Connectors for Dust Collection Kit 2 1/2" Transparent

B2460C Pipe Couplings for Dust Collection Kit 2 1/2" Transparent

NEW| 4" Angle Flange Base: 5" x 5 1/2" Fits 4" diameter