EXTENSION TABLE FOR CX212 TABLE SAW Large 27” x 39-3/4” black laminated 5/8” HDF extension table manufactured specifically for our CX212 table saw, with pre-drilled mounting holes and hardware. The CX212EXT includes two sturdy square steel tube support legs with leveling screws.

The Fingertip Pulse Oximeter fits all finger sizes from kids above four years old to adults as it measures the level of oxygen in the blood and reads the pulse rate in just eight to ten seconds. Get reliable accurate measurements instantly in seconds.

The quick roofing square also known as layout or angle square, rafter square or speed square is designed to provide carpenters with a quick and accurate way to mark out for many building projects and widely used when constructing roof rafters.

This oscillating edge belt sander will make a fantastic addition to your shop. Featuring a powerful 1 1/2HP, this production sander has an auxiliary table, used when sanding round or curved work-piece and for the optimum dust removal the sander has a 4" dust hood.

The CX205ST can fit both CX205 and CX206, giving your new CX Series table saw a heavy duty sliding table that will handle large stock. The table is made of heavy duty cast iron and measures in at 30" x 18".

The With ease. Three-knife cutter-head delivers 30% longer knife life and makes knife changefaster and easier.

4 Piece Replacement Steel Strap Clamps For B2151 or B2451A. Straps will fit dust collectors with a 25" diameter.

Features: Unmatched fit and finish with a keen attention to detail. SawStop Safety System stops on contact with skin.

Similar to the 14|12 Bandsaw but with a 220 Volt wiring.

Gap bed section Independent lead screw and feed rod Sealed gear box Carriage mounted spindle control lever Emergency stop Threading dial indicator Full length splash guard SPECIFICATIONS Motor: 2 HP, 220V, 1 phase Tailstock spindle taper: MT3 Swing over bed: 12" Swing over cross slide: 7" Swing through gap: 17" Distance between centers: 36" Spindle bore: 1 7/16" Spindle mount: D 1-4 Taper of spindle bore: MT5 Number of spindle speeds: 18 Range of spindle speeds: 65 - 1810 RPM No. & range of metric thread: 32 (0.

Extended Cutting Range: A variety of chipper widths provides maximum flexibilityCleaner Cuts: -5° hook means less tear out for cleaner cuts Specifications: Size: 8"Arbor: 5/8”Teeth: 24-tooth main bladeChippers: 5 chippersShims: 6 shims, 1/4" to 29/32"Cutting range: -5° hook angleMaximum RPM: 6000.

CX810N 50" Slip Roll - Craftex CX-Series This new 50" slip roll is designed to handle heavy rolling jobs. Featuring precision ground steel rollers, heavy duty bearings and hardened steel gearing the CX810N can handle mild steel up to 16 gauge.

***Please note that this is a presale. Actual product ships mid November*** Introducing Shaper Trace – Your Creative Vision, Precisely Crafted.

This 6" x 21" mill / drill is carefully built for accuracy and rigidity. Just like larger and expensive mills, the headstock on the CX611 tilts up to 90° to the right and 30° to the left for machining complex angles and the 6" x 21" table provides a large work space and smooth longitudinal and cross movement to ensure accuracy.

Perfectly sized holes to use with the included mechanical pencil for drawing different parallel lines. Precision marking ruler with a 5mm hole distance and 1mm hole size.

This heavy duty steel stand is designed for use with the CX302 Tilting Head Mortiser. Features strong steel construction & powder coated CX Series paint to match your sharp looking Mortiser.

FEATURES Powerful 5 HP Motor Riving Knife, CSA approved and UL897 Compliant Triple V-Belt Drive Precision Cam-Lever Fence with Left Tilting Arbor 1” and 5/8” Arbors Dado Insert Powder Coated Paint CSA Approved 3 Year Warranty Made in Taiwan SPECIFICATIONS Motor: 5HP, 220V, Single Phase TEFC Blade Size: 12” Table Size: 30” x 48” (with extension wings) Two Arbors: 1” and 5/8” Blade Speed: 4,140 RPM Max Depth of Cut @ 90 degree: 4” Max Depth of Cut @ 45 degree: 2 5/8” Dust Collection Port: 4” Floor to Table Height: 35” Arbor Extension: Included Weight: 300 Kg Warranty: 3 year.

Premium hardened & all ground body for extended tool lifeMax T. I.

***Please note the W1054 Dust Collection Accessory Kit will ship separately is currently out of stock and will be arriving in late February. *** DUST COLLECTOR WITH CANISTER AND HOSE KIT One of Bust Bee Tools best-selling dust collectors in Canada is now available as a combo for a limited time only.

Upgrade your old 8" Straight knife jointer with this helical cutterhead. This helical cutterhead features four rows of replaceable carbide inserts for a total of 40 carbide inserts effectively providing an incredibly smooth finish.