LAGUNA I FLUX 10HP CYCLONE DUST COLLECTO

Special Order, allow 6 to 8 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status.

Prices on Industrial machines from Laguna are subject to change, due to the nature of how Laguna quotes on these machines. The pricing listed on our website may not be accurate. Please speak with your Busy Bee Sales representative or call 1-800-461-2879 for more accurate information on pricing and lead time. Prices are subject to change without notice.

The I|Flux:10 Elite has solved this issue by using an appropriate filter arrangement with 409 square feet of surface area – double that of a typical 10HP collector. To do this, we used a smaller diameter bag and a lot more of them. This arrangement maximizes the amount of surface area possible which is vital to adequate airflow through the collector. Keeping these filters clean was addressed in the design. The positive pressure chamber pushes the air through the filters as the dust falls into the EZ Lift waste bins. As the dust cakes on, it will fall into the bin. A shaking mechanism has been added to help release the caked dust. The I|Flux Elite series has been tested in the assembly line, and it is ready for all fine dust applications.

Airflow 5000CFM @ 6”wc
The 15″ inlet has a net airflow of 5000CFM with a static pressure of 6″wc. A typical CNC Router needs a minimum requirement of 1500CFM, while a typical 37″ wide belt sander would call for a minimum 2000CFM. This makes the I|Flux: 10 Elite a great fit for a CNC Router-based cabinet shop that would be running several tools at once.

Fine Dust Ready
With fine dust, the key is to have a large filter surface area and to keep those filters clean. The smaller tube filter design of the I|Flux:10 Elite is designed for the fine dust to cake on the inner side of the filters and fall into the bin as the mass grows. The filter surface area of the I|Flux: 10 Elite is 409 square feet. A typical 5HP dust collector has a surface area of 260 square feet. This increase in filter area translates to a large increase in airflow, making the I|Flux an ideal machine for fine dust applications.

Quick Lever Waste Bins
Changing the waste bins has never been easier. Deactivate the air-tight seal by pulling up the release bar and rolling out the bin. The positive pressure design means there is no need for a bag hold-down system like in a multi-stage system. The wheels swivel 360 degrees and are mounted on a sturdy base to ensure they work in your shop for many years.

Additional Features
The I|Flux:10 Elite fine dust collector displays an amperage readout on the control panel. This allows the user to monitor the efficiency of the motor. A high-frequency remote is also included so the operator can turn the machine on and off within a 60-meter range.

Safety
There are several NFPA standards in place to ensure the proper installation and use of a dust collector. For woodworkers, the standard is NFPA 664: Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities. The I|Flux: 10 Elite complies directly with this standard. In addition, the I|Flux is fitted with a phase controller and TEFC motor for added electrical safety.

Features:

• Motor HP: 10


• Motor RPM: 1720


• Air Flow: 5000CFM @ 6″wc


• Inlet Diameter: 15″


• Filter Area: 409 ft²


• Filter Bag: 40 x D168mm x H1800mm


• Filter Bag Material: Polyester


• Filter Cleaning: Manual Shaker


• Waste Bin: EZ Lift Metal Bin 64gal x 3

Specifications:

• Power Requirements: 220V/ 60Hz/ 3Ph


• Amperage: 24.8 Amps


• Floor Space (W x L): 3424mm x 1140mm


• Machine Weight: 1069 lbs (485 kgs)


• Motor HP: 10


• Motor RPM: 1720


• Air Flow: 5000 CFM @ 6″wc


• Inlet Diameter: 15″


• Filter Area: 409 ft²


• Filter Bag (L x D x H): 40 x 168 x 1800mm


• Filter Bag Material: Polyester


• Filter Cleaning: Manual Shaker


• Waste Bin: EZ-Lift Metal Bin 64 Gal. x 3


• Shipping Weight: 1113 lbs


• Shipping Dimensions (L x W x H): 75″ x 39″ x 80″