FEATURES 3 common bowl gouge sizes in one kit Quick-change 3/8" knurled collet Two lengths of tail piece for different turning preferences Dampening spacer to reduce vibration INCLUDES 1/2" Bowl Gouge 3/8" Bowl Gouge 1/4" Bowl Gouge 9" tail piece 5" tail piece Dampening spacer Aluminum case with fitted foam inserts.
Hardened & Ground Tool-Steel
Precision drill sleeves to use Morse Taper tooling in R8 spindles or using
smaller MT
tooling in larger MT spindles|
Taper reduction: From R8 to MT2.
Bowl Gouge by Robert Sorby- 1/2" - 23" Length
Deep fluted to allow heavy cuts to be taken. This tool is used over on its side (about 15-20m off the vertical) with the flute pointing in the direction of the cut.
Tubing Center This well constructed tubing center is ideal for hollow work pieces like pipes & tubing. With sealed ball bearing you don't have to worry about dust getting in.
Curved Scraper - Robert Sorby The curved end profile makes this excellent for creating, smoothing and
blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an aggressive cut, whilst retaining the
butterfly sensitivity for the refining cuts.
CX813EXT
22" Bed Extension for CX813 - Craftex CX-Series
Bed Extension for CX813 Mini Wood Lathe
The CX813 can be extended another 22" by installing this bed extension.
By Robert Sorby
May be used with the "Sand Master" or separately
Available - 2" Velcro Sponge Discs - 10 Per Pack
Model Grit
RS412A60 60
RS412A120 120
RS412A180 180
RS412A240 240.
This wood lathe chuck set includes a four jaw self-centering chuck and interchangeable jaws for spindles, bowls and work-pieces that are hard to be secured.
Cutting tools have been produced in 10, 16 and 20 thread per inch, with a
unique, enhanced helix angle specially designed for use in wood to compliment
these excellent tools. A Relief Cutting Tool Support Rest makes forming
internal threads easier and our Thread and Sizing Gauge takes all the guesswork
out of dimensioning.
This wood lathe chuck set includes a four jaw self-centering chuck and interchangeable jaws for spindles, bowls and work-pieces that are hard to be secured.
3/8" Bowl Gouge (Long Handle)
There is difficulty in achieving this profile. Robert Sorby offers a selection
of gouges with a factory ground
fingernail profile, which is not only safe in use, but also allows the turner
to modify the profile to his
specific requirements.
Pin jaws are great for expansion in to small recesses and for firm holding of
fine spindle work. They are ideal for turning items such as salt and pepper
shakers, chess pieces and fine spindle work.