Pin jaws are great for expansion in to small recesses and for firm holding of fine spindle work. They are ideal for turning items such as salt and pepper shakers, chess pieces and fine spindle work.

Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT4 to MT2.

Increase the turning capacity of you CX814 wood lathe by 24” with the CX814EXT extension. Also finished in the same ultra durable hammer tone finish making this a great pairing for you lathe.

Optional sleeve for the B2618 - 4 Jaw Wood Chuck 3/4" x16 TPI.

It is recommended that 9" crossbars are only used with any stem 3/4" (19mm) or bigger due to the forces created when turning wood.

Used with flute downwards. This tool gives an exceptionally good finish even when parting through end grain.

1/8" H. S.

An essential tool for between centre (spindle) work. This tool will quickly turn down square timber to round.

These tools provide the means of forming perfect beads from 1/8" to 1/2". The nose design permits multiple beads to be cut with precision on spindle for faceplate work.

These high quality modular tool rest posts are made from super strong, precision ground polished alloy steel for vibration free turning. This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense.

There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground finger-nail profile, which is not only safe in use, but also allows the turner to modify the profile to his specific requirements.

By Robert Sorby H. S.

By Robert Sorby H. S.

Now you can pass the salt and pepper at the same time. This handy salt and pepper grinder mechanism allows you to grind pepper and add salt all from the same peppermill.

Wood turners can always use dovetail jaws. These jaws are designed for mounting bowls in to recess or a spigot.

Professional Wood Turning Chisel Set Standard set of 5pcs 1 - 3/4'' Roughing Gouge 1 - 3/8'' Spindle Gouge 1 - 1/2" Round Nose Scraper 1 - 1/2" Skew Chisel 1 - 1/8'' Parting Tool Approx. Length: 14'' Overall Length.

This system has many design features that make it the must have in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2", 5/8", 3/4", 1", 11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Holding Dimensions: External chucking Minimum: 2 3/4" Maximum: 11" Optional Holding Dimensions: Internal chucking Minimum: 4 3/4" Maximum: 12" Made in Canada.

There is difficulty in achieving this profile. Robert Sorby offers a selection of gouges with a factory ground finger-nail profile, which is not only safe in use, but also allows the turner to modify the profile to his specific requirements.