CUP PARTS KIT (3X2024,3X2037,3X2038)FUJI

2039 Bottom Feed Cup Parts Kit (T-70, 7001 M-Model& 7003 M-ModelSpray Guns)
Includes the wearable parts that you should always have on hand:
3 X#2036 Gaskets
3 X #2038 Diaphragms
3 X #2024 Pressure Tube with Check Valves

(All the parts shown in the kit can be ordered separately.)

2036 Gaskets - to be used withDiaphragm #2038. Please note: Nylon cups do not require gaskets.

2038 Diaphragm - designed to be tough and durable, these bottom feed diaphragms can last months, even years if care is taken when sliding them down the metal pickup tube. To remove them from the cup, grab the tab. The air hole in the diaphragm should be positioned at the rear of the cup, towards the handle, unless you intend to spray upwards for any length of time. For spraying upwards, position the hole in the diaphragm towards the front of the spray gun. The idea is to keep the hole out of the finish as much as possible. These diaphragms, in combination with the pressure tube/check valve, cure the problem of finish entering the air passage.

2024 Pressure Tube with Check Valves - can be used with any Fuji Spray® 1 Qt cup spray gun. If clogged, the check valve cannot be taken apart, but they can be soaked in thinner for up to 30 minutes to free any blockage. 

WEIGHT: 0.2lb/ 0.07

*If you own a Gravity Cup, please order a Gravity Cup Parts Kit instead:
* #2030 - 400cc Gravity Cup Parts Kit
* #2060 - 600cc/1000cc Gravity Cup Parts Kit