Description
B2561
Large STOP push bottom Switch
This switch features a huge quick stop paddle, which allows easy and fast access to cut power. Fits standard box enclosure.
This switch has 3 pairs of terminals; three for line and three for load. This switch can be used for 110 volts 230 volts in single phase or 208 volts 230 volts and 480 volts in three phase.
They are rated at 120 volts for 2 HP 35 A, 230 volts 3 HP 20 Amp.
5 Reviews
-
Installation on a cx104 bandsaw
This switch works just fine on my cx104 bandsaw. This switch has 6 terminals but my cx104 only needs 4. The spare terminals can be used to substitute either one of the other terminal sets when they eventually burn out. Note that the mounting hole spacing is too short for the bandsaw, however, this is not a problem. The original switch is a modified Kedu HY56 switch hence all one needs to do is transfer the modified parts to the new switch.
-
Switch large stop button
Worked great for my requirements. I installed this on my old lathe in about 15 minutes. Now I have a quick way to shut off the lathe in an emergency.
-
It turns on and it turns off.
questionable quality. this unit replaces the switch on a table saw that is five and a half years old.
-
2HP Switch
well built thought a little big for a standard box
-
Safety switch
Works well, could of had an instruction diagram but installation was simple.
