null

  • POCKET SCREW HD 2 1/2IN. NO. 4COARSE 125/PACK
    Add to Cart

    Kreg

    POCKET SCREW HD 2 1/2IN. NO. 4COARSE 125/PACK

    CAD $29.99
    SMLC2X250125 2-1/2", 125/pk No.4 Coarse Pocket Screw - KREG Large 2-1/2" long #14 hardened-steel screws for 1-1/2" and thicker material Massive flat surface under head provides superior holding power Self-tapping thread design does not require second...
    SMLC2X250125
    CAD $29.99
    Add to Cart
  • COOLANT PUMP FOR METAL WORKING MACH. CSA
    Add to Cart

    COOLANT PUMP FOR METALWORKING

    Now: CAD $369.00
    Was: $399.00
    B3087 Coolant Pump System with Magnetic Base The B3087 Coolant Pump System can be used with any metal cutting machine for reduced tool wear, efficient cutting and better finishes. The coolant pump has a maximum capacity of 5 gallons and comes with...
    B3087
    Now: CAD $369.00
    Was: $399.00
    Add to Cart
  • DRUM SANDER 26IN. CRAFTEX CX SERIES CSA
    Add to Cart

    Craftex CX Series

    DRUM SANDER 26IN. CRAFTEX CX SERIES

    Now: CAD $3,899.00
    Was: $4,399.00
    CX504 26" Drum Sander - Craftex CX-Series The CX504 features a high output 3HP motor which turns the two 6" drums at a speed of 1600 RPM for an excellent result. This sander can take work-pieces up to 26" wide and 12" thick and is equipped with a heavy...
    CX504
    Now: CAD $3,899.00
    Was: $4,399.00
    Add to Cart
  • POCKET SCREWS 1 1/4IN. NO. 7 FINE W/H 100CT SMLF125100
    Add to Cart

    Kreg

    POCKET SCREWS 1 1/4IN. NO. 7 FINE W/H 100CT SMLF125100

    CAD $6.99
    Kreg Zinc Screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection Available in a variety of sizes, thread options, head styles, and quantities...
    SMLF125100
    CAD $6.99
    Add to Cart
  • GRINDER AND SANDER 8IN. X 2IN. COMBO CRAFTEX CT169N
    Add to Cart

    Craftex

    8IN. X 2IN. GRINDER SANDER COMBO MACHINE

    Now: CAD $189.00
    Was: $199.00
    CT169N Bench Grinder & Belt Sander Combo – Craftex The CT169N grinder and sander combo tool is perfect for knife honing, tool sharpening and sanding small parts. The 1/2-HP, 120-Volts motor provides a 3450 RPM grinding speed to handle just...
    CT169N
    Now: CAD $189.00
    Was: $199.00
    Add to Cart
  • KNEE MILL VERTICAL CRAFTEX CX SERIES
    Add to Cart

    Craftex CX Series

    KNEE MILL VERTICAL CRAFTEX CX SERIES CX603

    Now: CAD $7,599.00
    Was: $7,999.00
    CX603 1-1/2 HP Knee Milling Machine - Craftex CX-Series This heavy duty knee mill has the power and space to make quick and accurate work of just about any machining job you can throw at it. Equipped with a 1-1/2 HP motor, a 8" x 30" work table and...
    CX603
    Now: CAD $7,599.00
    Was: $7,999.00
    Add to Cart
  • 6IN. X 89IN. OSCILLATING EDGE SANDER
    Add to Cart

    Craftex CX Series

    6IN. X 89IN. OSCILLATING EDGE SANDER

    Now: CAD $1,799.00
    Was: $2,299.00
    CX505 6" x 89" Oscillating Edge Belt Sander - Craftex CX-Series This oscillating edge belt sander will make a fantastic addition to your shop. Featuring a powerful 1 1/2HP, this production sander has an auxiliary table, used when sanding round or...
    CX505
    Now: CAD $1,799.00
    Was: $2,299.00
    Add to Cart
  • 4.5IN. SWIVEL METAL BANDSAW
    Add to Cart

    Craftex CX Series

    4.5IN. SWIVEL METAL BANDSAW

    Now: CAD $999.00
    Was: $1,099.00
    CX109 4-1/2" Metal Band Saw with Swivel Head - Craftex CX-Series The CX109 has all the features a metalworker wants in a mid size band saw. It has 4-1/2" capacity with a swivel head which allows user to adjust the band saw to the desired angle for...
    CX109
    Now: CAD $999.00
    Was: $1,099.00
    Add to Cart
  • DOVETAIL JIG 12IN. CRAFTEX WITH HEIGHT ADJ
    Add to Cart

    12IN. DOVETAIL JIG

    CAD $139.00
    CT052N 12" Deluxe Dovetail Jig - CRAFTEX The New and Improved Independent Template Height Adjustment feature on CT052N allows the user to adjust the template to the desired height independent of the fence. The CT052N features a solid and durable...
    CT052N
    CAD $139.00
    Add to Cart
  • HEIGHT GAUGE MINI WIXEY DIGITAL
    Add to Cart

    Wixey Digital

    HEIGHT GAUGE MINI WIXEY DIGITAL

    CAD $37.99
    WR25 Height Gauge Mini WIXEY The large easy to read display reads in inches with fractions or millimetres. The fractions are displayed using "Precise Fraction Technology" which gives you 4 times the accuracy of other fraction readouts. The decimal...
    WR25
    CAD $37.99
    Add to Cart
  • AIR COMPRESSOR 3HP SINGLE TANK MAKITA
    Add to Cart

    Makita

    AIR COMPRESSOR 3HP SINGLE TANK MAKITA

    Now: CAD $544.69
    Was: $599.00
    MAC5200 3.0 HP Air compressor - MAKITA Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance Powerful 3.0 HP* motor produces 6.5 CFM at 90 PSI for increased productivity Pump is...
    Clearance
    MAC5200
    Now: CAD $544.69
    Was: $599.00
    Add to Cart
  • SANDER 5IN. RANDOM ORBITAL MAKITA
    Add to Cart

    Makita

    SANDER 5IN. RANDOM ORBITAL MAKITA

    CAD $109.00
    BO5030   5" Random Orbit Sander - MAKITA   Large 1/8" random orbit action for fast and super smooth sanding Pad control system for controlled pad speed upon start-up Efficient through-the-pad dust collection system for a cleaner work...
    BO5030
    CAD $109.00
    Add to Cart
  • POCKET SCREW 2 1/2IN. NO. 8 BLKT CRSE W/H250
    Add to Cart

    Kreg

    POCKET SCREW 2 1/2IN. NO. 8 BLKT CRSE W/H250

    CAD $32.99
    The Kreg SML-C250B-250 Blue-Kote Weather Resistant Pocket Hole Screws has various applications like repairing, making it a handy tool to own among your other hand and power tools. With its compact size, you will be able to fit it in tight spaces and...
    SMLC250B250
    CAD $32.99
    Add to Cart
  • POCKET SCREW 1IN. NO. 8 COARSE WH 100CT KREG
    Add to Cart

    Kreg

    POCKET SCREW 1IN. NO. 8 COARSE WH 100CT KREG

    CAD $6.99
    This 1" coarse thread, #2 square drive washer head screw works well in 1/2" thick, softer material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This...
    SMLC1100
    CAD $6.99
    Add to Cart
  • TURBINE FILTER FOR Q3 OR Q4 PRO OR GOLD
    Add to Cart

    Fuji Spray

    TURBINE FILTER FOR Q3 Q4 AND Q5 FUJI

    CAD $10.75
    5029 Turbine Filter for Q3, Q4 and Q5 PLATINUM Series Turbine filter fits all Q Platinum Series turbines only Friction-fit allows for quick and easy replacement, without taking apart the turbine Washable WEIGHT: 0.1lb / 0.06kg
    5029
    CAD $10.75
    Add to Cart
  • CUP PARTS KIT 3X2024 3X2037 3X2038 FUJI
    Add to Cart

    Fuji Spray

    CUP PARTS KIT 3X2024 3X2037 3X2038 FUJI

    CAD $37.25
    2039 Bottom Feed Cup Parts Kit (T-70, 7001 M-Model& 7003 M-ModelSpray Guns) Includes the wearable parts that you should always have on hand: 3 X#2036 Gaskets 3 X #2038 Diaphragms 3 X #2024 Pressure Tube with Check Valves (All the parts shown in the...
    2039
    CAD $37.25
    Add to Cart
  • PRESSURE TUBE/CHECK VALVES 5
    Add to Cart

    Fuji Spray

    PRESSURE TUBE/CHECK VALVES 5

    CAD $26.95
    20245 Pressure Tubes with Check valve for Bottom Feed (T-Series Spray Gun) Pressure tubes with check valve installed Available in 5-pack Tubes are designed to fit all Bottom Feed Fuji Spray® guns If clogged, the check valve cannot be taken apart,...
    20245
    CAD $26.95
    Add to Cart
  • SEMI PRO 2 STAGE SYSTEM FUJI
    Add to Cart

    Fuji Spray

    SEMI PRO 2 STAGE SYSTEM FUJI

    CAD $639.00
    2202 - Semi-Pro2 System with Bottom Feed Spray Gun (7001 M-Model Spray Gun) The Semi-Pro 2 is the perfect HVLP spray system for serious DYR-ers and semi-professionals. Powerful 1400 watt motor provides enough power to spray all coatings, develops...
    2202
    CAD $639.00
    Add to Cart
  • DVD FOR CX104 SETUP TO CUT W. MARK EATON
    Add to Cart

    Craftex CX Series

    DVD FOR CX104 SETUP TO CUT W. MARK EATON

    CAD $4.99
    Master the CX104 with Expert Guidance! Unlock the full potential of your CX104 band saw with our exclusive instructional DVD featuring renowned woodworker, Mark Eaton. This comprehensive video guide is designed specifically for Busy Bee Tools customers...
    CX104DVD
    CAD $4.99
    Add to Cart
  • BASE PLATE/BUSHING SET
    Add to Cart

    Milescraft

    BASE PLATE/BUSHING SET

    CAD $27.99
    1201 Baseplate/Bushing Set - MilesCraft Forget fumbling with tiny bolts and screwdrivers. The TurnLock™ concept turns changing guide bushings, and installing router attachments, into a simple matter of a 1/4 twist.  Just align the TurnLock™ bushing...
    1201
    CAD $27.99
    Add to Cart
  • LED LAMP FLEXIBLE WITH MAGNETIC BASE
    Add to Cart

    LED LAMP FLEXIBLE WITH MAGNETIC BASE

    CAD $22.99
    B3071 LED Light with Magnetic Base and Flexible Neck This 18” gooseneck light with 3 LED bulbs delivers crisp white high-output light for assembly, inspection, bench work, and electronic applications. The strong magnetic base holds the light on any...
    B3071
    CAD $22.99
    Add to Cart
  • DRILL BIT 5MM FOR KMA3200 KREG
    Add to Cart

    Kreg

    DRILL BIT 5MM FOR KMA3200 KREG

    CAD $16.99
    KMA3215 5mm Drill Bit for KMA3200 - KREG A very fast and simple technique to build shelving whether you are a DIY'er or a pro Hex shank drill bit that is compatable with the Kreg Quik-Adapt INCLUDES: Drill Bit, Stop Collar, and allen wrench
    KMA3215
    CAD $16.99
    Add to Cart
  • DUST CYCLONE KIT MINI BLUE TORNADO
    Add to Cart

    Craftex Blue Tornado

    DUST CYCLONE KIT MINI BLUE TORNADO

    Now: CAD $79.99
    Was: $99.99
    Mini Dust Cyclone Kit B3069 by Blue Tornado... by busybeetools B3069 Mini Dust Cyclone Kit – Craftex Blue Tornado For use with most common shop vacuums, this mini cyclone tank will eliminate virtually all dust particles from your shop without...
    B3069
    Now: CAD $79.99
    Was: $99.99
    Add to Cart
  • BLADE 101IN. X 3/16IN. X .025 X 10 RAKER
    Add to Cart

    Raptor Cutting Tools Inc.

    BANDSAW BLADE 101IN. X 3/16IN. X .025 X 10 R

    Now: CAD $30.27
    Was: $35.99
    ÿþCX10431610 101" x 3/16" x 0.025" x 10 TPI Raker Tooth Blade for CX104 Length: 101" Width: 3/16" Thickness: 0.025" TPI: 10
    Clearance
    CX10431610
    Now: CAD $30.27
    Was: $35.99
    Add to Cart
  • STAND FOR MILLING MACHINE CX600
    Add to Cart

    Craftex CX Series

    STAND FOR MILLING MACHINE CX600 CX600ST

    CAD $349.00
    CX600ST  Optional Stand for CX600 Mill / Drill - Craftex CX-Series  Featuring heavy gauge welded steel construction this optional stand is designed for CX600 Mill / Drill. The stand is 14-3/4" in length and features a storage cabinet with a...
    CX600ST
    CAD $349.00
    Add to Cart
  • DOWEL TENON CENTER SET MILESCRAFT
    Add to Cart

    Milescraft

    DOWEL TENON CENTER SET MILESCRAFT

    CAD $5.99
    5343 8-pc Dowel/Tenon Center Set - MILESCRAFT Accurately mark location of dowel holes or existing pins location in second board being joined Eight piece set includes two dowel centers for 1/4, 5/16, 3/8, and 1/2-Inch holes Eight piece set includes two...
    5343
    CAD $5.99
    Add to Cart
  • DRILLSTOP SET MILESCRAFT
    Add to Cart

    Milescraft

    DRILLSTOP SET MILESCRAFT

    CAD $5.99
    5342 6pc Drill Stop Set - Milescraft Set includes stop collars for controlling drill bit depth to a precise setting Six piece set includes stops for 3/16, 1/4, 5/16, 3/8, 7/16, and 1/2-Inch diameter drill bits Includes Allen wrench for tightening stops'...
    5342
    CAD $5.99
    Add to Cart
  • COUNTERBIT SET MILESCRAFT
    Add to Cart

    COUNTERBIT SET MILESCRAFT

    CAD $15.99
    5341 4pc Counterbit Set - Milescraft Simultaneously countersink or counterbore screw pilot holes Four piece set includes bits for drilling pilot holes for screw sizes #6, #8, #10, and #12 Special designed steel counter sleeve countersinks or...
    5341
    CAD $15.99
    Add to Cart
  • PLUG CUTTER 3PC SET MILESCRAFT
    Add to Cart

    Milescraft

    PLUG CUTTER 3PC SET MILESCRAFT

    CAD $21.99
    5340 3pc Plug Cutter Set - Milescraft Produce tapered plugs from the same stock for superior grain matching or for removing small blemishes. Set includes bits for drilling scrap project material to produce tapered plugs to cover screws or hide blemishes...
    5340
    CAD $21.99
    Add to Cart
  • 6 SHELF LUMBER STORAGE RACK
    Add to Cart

    Craftex

    6 SHELF LUMBER STORAGE RACK

    Now: CAD $49.99
    Was: $59.99
    CT177 Lumber Rack 6 Shelf System Organize your workshop by using this lumber rack storage system. Constructed of high quality, powder coated tubular steel, this wood rack provides 6 levels of storage for a variety of materials including lumber,...
    CT177
    Now: CAD $49.99
    Was: $59.99
    Add to Cart
  • DUST COLLECTOR 2HP W EASY ON BTM BAG CSA
    Add to Cart

    Craftex CX Series

    2HP DUST COLLECTOR CX405

    Now: CAD $699.00
    Was: $799.00
    CX405 2-HP Dust Collector – Craftex CX-Series Equipped with powerful 2 HP motor and dual intake, this dust collector can be used in machine groupings making it a go to dust collector. The unit features a 1 micron top bag and a large base with...
    CX405
    Now: CAD $699.00
    Was: $799.00
    Add to Cart
  • BELT SANDER METALWORKING CX SERIES CX503
    Add to Cart

    Craftex CX Series

    3IN. X 78IN. METALWORKING BELT SANDER

    Now: CAD $1,149.00
    Was: $1,299.00
    CX503 Metal Working Belt Sander – Craftex CX-Series Featuring a powerful 2-HP motor and heavy duty cast iron construction the CX503 is built to the professional metalworker’s demand. The 3” x 78” sanding belt rotates at a speed...
    CX503
    Now: CAD $1,149.00
    Was: $1,299.00
    Add to Cart
  • Y FITTING 2 1/2IN. PLASTIC
    Add to Cart

    2.5IN. Y CONNECTOR FOR DUST COLLECTION

    CAD $7.99
    B3055 2-1/2" Plastic Y-Fitting Classic Y-Fitting now for 2-1/2" Hose Connect hose to your dust collector and spread at a 45 degree angle for ease of use in the shop.  Size: 2-1/2"
    B3055
    CAD $7.99
    Add to Cart
  • T FITTING 2 1/2IN. PLASTIC
    Add to Cart

    2.5IN. T CONNECTOR FOR DUST COLLECTION

    CAD $7.99
    B3054 2-1/2" Plastic T-Fitting Classic T-Fitting now for 2-1/2" Hose Connect hose to your dust collector and spread at a 90 degree angle for ease of use in the shop. Size: 2-1/2”
    B3054
    CAD $7.99
    Add to Cart
  • BENCH DOGS KREG
    Add to Cart

    Kreg

    BENCH DOGS KREG

    CAD $17.99
    KKS1070 Bench Dogs – KREG These simple 3/4" reinforced bench dogs included several features to help make your next project easier. KKS1070 features square clamping Pads for solid and secure hold and the Bench Brakes for non-slip work surface. The...
    KKS1070
    CAD $17.99
    Add to Cart
  • MAGNIFYING SHEET FULL PAGE
    Pre-Order Now

    MAGNIFYING SHEET FULL PAGE

    CAD $6.99
    B3075 Full Page Magnifying Sheet This 7-1/2” x 11-3/4” magnifier with 2X magnification makes it easier to read magazines, news papers, or books, scanning maps or looking up for telephone numbers. Featuring a black border cover, ensures its long life...
    B3075
    CAD $6.99
    Pre-Order Now
  • MAGNETIC LIGHT
    Add to Cart

    MAGNETIC WORKSHOP LIGHT

    Now: CAD $24.99
    Was: $28.99
    B3053 Magnetic Work Light This handy magnetic work light features flexible gooseneck arm and a strong magnetic base. The base has optional mounting holes which allow the lamp to be mounted on a table or bench top. Uses a standard 40W bulb. (Mounting...
    B3053
    Now: CAD $24.99
    Was: $28.99
    Add to Cart
  • TRIGRIPS MILESCRAFT
    Add to Cart

    TRIGRIPS MILESCRAFT

    CAD $9.99
    1600 Tri Grips – MILESCRAFT These Non-slip friction pads hold projects in place without clamps while routing, sand, painting, etc Platforms elevate projects 1-3/16 inch above the work surface for complete access to edges for painting Exclusive...
    1600
    CAD $9.99
    Add to Cart
  • PATTERN BIT SET 6PC CRAFTEX BLUE TORNADO
    Add to Cart

    Craftex Blue Tornado

    6PC PATTERN ROUTER BIT SET

    CAD $142.00
    This set of six pattern bits are useful in almost any shop. These bits are perfect for working with a pattern to make multiple, accurate parts. Bits come in 1/4" & 1/2" shank. SPECIFICATIONS Bit 1: 1/4" x 3/4" x 1/2" Bit 2: 1/4" x 5/8" x 25/32" Bit 3:...
    R949
    CAD $142.00
    Add to Cart
  • STAND FOR MILLING MACHINE CX601
    Pre-Order Now

    Craftex CX Series

    STAND FOR MILLING MACHINE CX601 CX601ST

    CAD $379.00
    CX601ST Optional Stand for CX601 Mill / Drill - Craftex CX-Series Featuring heavy gauge welded steel construction this optional stand is designed for CX601 Mill / Drill. The stand is 14-3/4" in length and features a storage cabinet with a shelf and a...
    CX601ST
    CAD $379.00
    Pre-Order Now
  • MILLING MACHINE WITH DIGITAL READOUT
    Add to Cart

    Craftex CX Series

    1 1/4IN. MILLING MACHINE 1.5HP

    Now: CAD $3,699.00
    Was: $3,999.00
    CX601 Mill / Drill with Digital Readout - Craftex CX-Series Having most of the features found on larger machines, the CX601 Mill/Drill is a fine addition to your shop. The 33-1/16" x 8-1/4" table provides a large work space and the T-slots allow...
    CX601
    Now: CAD $3,699.00
    Was: $3,999.00
    Add to Cart
  • BELT 2 X 28 GR080
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR080

    CAD $7.99
    CT16980 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 80
    CT16980
    CAD $7.99
    Add to Cart
  • BELT 2 X 28 GR060
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR060

    CAD $7.99
    CT16960 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 60
    CT16960
    CAD $7.99
    Add to Cart
  • BELT 2 X 28 GR040
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR040

    CAD $7.99
    CT16940 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 40
    CT16940
    CAD $7.99
    Add to Cart
  • BELT 2 X 28 GR220
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR220

    CAD $7.99
    CT169220 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 220
    CT169220
    CAD $7.99
    Add to Cart
  • BELT 2 X 28 GR180
    Pre-Order Now

    Primex Abrasives

    BELT 2 X 28 GR180

    CAD $7.99
    CT169180 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 180
    CT169180
    CAD $7.99
    Pre-Order Now
  • BELT 2 X 28 GR120
    Pre-Order Now

    Primex Abrasives

    BELT 2 X 28 GR120

    CAD $7.99
    CT169120 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 120
    CT169120
    CAD $7.99
    Pre-Order Now
  • BELT 2 X 28 GR100
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR100

    CAD $7.99
    CT169100 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 100
    CT169100
    CAD $7.99
    Add to Cart
  • DOVETAIL CUTTER 1/2 X 45DEG COBALT M42
    Add to Cart

    DOVETAIL CUTTER 1/2 X 45DEG COBALT M42

    CAD $42.99
    125305COB 1/2" x 45-Degree Cobalt Dovetail Cutter This cobalt dovetail cutter is designed to cut dovetail in a wide variety of materials and it can also be used for chamfering or milling angles on bottom surface of a part. Cutting Diameter:...
    125305COB
    CAD $42.99
    Add to Cart
  • POWER FEEDER FOR MILLING MACHINES
    Add to Cart

    POWER FEEDER FOR MILLING MACHINES AL500PX

    CAD $679.00
    AL500PX Power Feeder for Milling Machine - ALIGNFor 2V, 3V and 5V milling machine of table feedHighest quality design and construction material.Strengthened "ZYLTEL GEAR"Safe design operation stable low noise.Long life span designed...
    AL500PX
    CAD $679.00
    Add to Cart
  • BLADE 12IN. X72T MINUS 5DEG CRAFTEX BLUE TO
    Add to Cart

    Craftex Blue Tornado

    SAW BLADE 12IN. X72T MINUS 5DEG CRAFTEX BLU

    CAD $100.99
    CBT019 Ripping Blade 12" x 72T - Craftex Blue Tornado The perfect sliding miter saw blade! This thin kerf industrial blade is perfect for miter saws. The 5 degree negative hook angle helps prevent the blade from being too aggressive and pushes the...
    CBT019
    CAD $100.99
    Add to Cart
  • STAND FOR METAL LATHE CX701 CRAFTEX
    Add to Cart

    Craftex CX Series

    STAND FOR 12IN. X 28IN. METAL LATHE CX701

    CAD $399.00
    CX701ST Optional Stand for CX701 Metal Lathe - Craftex CX-Series Featuring heavy gauge welded steel construction this optional stand is designed for CX701 metal lathe. The stand is 45-3/4" in length and features two storage cabinets with shelves and...
    CX701ST
    CAD $399.00
    Add to Cart
  • METAL LATHE 12IN. X28IN. WITH DIGITAL READOUT CX701
    Add to Cart

    Craftex CX Series

    12IN. X 28IN. METAL LATHE 1.5HP

    Now: CAD $4,699.00
    Was: $4,999.00
    CX701   12” x 28” Metal Lathe with Digital Read Out - Craftex CX-Series  This new CX-Series Metal Lathe is has the features a serious turner would be looking for. Features include a powerful 1.5HP motor, a large 1.5”...
    CX701
    Now: CAD $4,699.00
    Was: $4,999.00
    Add to Cart
  • BLADE SET W/CASE JIGSAW 10PC COBALTSTEEL
    Add to Cart

    DeWalt

    BLADE SET W/CASE JIGSAW 10PC DEWALT

    CAD $26.00
    DW3744C While Quantities last. 10-piece Jig Saw Blade Set with case (U shank) - DeWalt Dewalt DW3744C 10 Pc U-Shank Jig Saw Blade Set with Case comes with three different sets of blades. The 6, 10 and 12-tooth per inch blades are made with HCS material...
    DW3744C
    CAD $26.00
    Add to Cart
  • SCROLL SAW BLADE HOOK FRET 7TPI 6PCS/PK
    Add to Cart

    SCROLL SAW BLADE HOOK FRET 7TPI 6PCS/PK

    CAD $11.99
    FR41001 Pin End Scroll Saw Blade 6 Pack, 7 TPI Scroll Saw Blade, .100" Wide, .018" Thick, 5" Pinned With Hook Teeth, For Aggressive Cutting Of Wood Up To 2" Thick The product is manufactured in China The product is easy to use and highly durable
    FR41001
    CAD $11.99
    Add to Cart
  • STAND TOOL 13IN. X 23IN. CAPACITY 700LB D2056
    Add to Cart

    Woodstock

    STAND TOOL 13IN. X 23IN. CAPACITY 700LB D2056

    CAD $189.00
    D2056 Tool Stand Flared legs and adjustable feet ensure stability and reduce machine vibration. Butcher block finish table top measures 13" x 23". Height: 30 ½" Capacity: 700 lbs.
    D2056
    CAD $189.00
    Add to Cart
  • POCKET SCREWS 1 1/2IN. NO. 8 CRSE W/H 100CT
    Add to Cart

    Kreg

    POCKET SCREWS 1 1/2IN. NO. 8 CRSE W/H 100CT

    CAD $7.99
    Kreg Zinc Screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection. Available in a variety of sizes, thread options, head styles, and quantities...
    SMLC150100
    CAD $7.99
    Add to Cart
  • FEATHER BOARD SINGLE PACK KREG
    Add to Cart

    Kreg

    FEATHER BOARD SINGLE PACK KREG

    CAD $28.99
    PRS3010 Feather Board Single Pack - KREG TOOLS Made of extremely durable plastic composite body, this feather board is designed to provide consistent and optimum pressure resulting perfect cuts and safe operation. It features a wedge lock system which...
    PRS3010
    CAD $28.99
    Add to Cart
  • CENTRE PUNCH/SCRIBE SET
    Add to Cart

    CENTRE PUNCH/SCRIBE SET

    CAD $9.99
    Automatic Center Punch and Double Ended Scriber Set This set consists of an automatic center punch and a double ended scriber. The center punch allows automatic single hand operation and is adjustable from very light to extra heavy markings. The...
    B3019
    CAD $9.99
    Add to Cart
  • UNIVERSAL FENCE CLAMP 3IN. TO 4.5IN. 2PC
    Add to Cart

    UNIVERSAL FENCE CLAMP 3IN. TO 4.5IN. 2PC

    CAD $14.99
    B3059 2-pc Universal Fence Clamps Shop made auxiliary fences have never been so easy to hold. These 2-pc Universal Fence Clamps allow holding 3" to 4-1/2" thick shop made auxiliary fence to your existing fence without the clamp interfering with your...
    B3059
    CAD $14.99
    Add to Cart
  • MORTISING MACHINE WITH TILTING HEAD CSA
    Add to Cart

    Craftex CX Series

    MORTISING MACHINE WITH TILTING HEAD

    Now: CAD $729.00
    Was: $849.00
    CX302 Mortising Machine with Tilting Head This heavy duty tilting head Mortiser features cast iron construction, a powerful 3/4HP motor, left/right tilting head for angled mortising & a solid quick release vise. Other features on this unit include...
    CX302
    Now: CAD $729.00
    Was: $849.00
    Add to Cart
  • STAND FOR MORTISING MACHINE CX302
    Add to Cart

    Craftex CX Series

    STAND FOR MORTISING MACHINE CX302 CX302ST

    CAD $159.00
    CX302ST Steel Stand for CX302 Mortising Machine This heavy duty steel stand is designed for use with the CX302 Tilting Head Mortiser. Features strong steel construction & powder coated CX Series paint to match your sharp looking Mortiser...
    CX302ST
    CAD $159.00
    Add to Cart
  • BAND SAW 14IN. DELUXE CRAFTEX CX SERIES CSA
    Add to Cart

    Craftex CX Series

    BAND SAW 14IN. DELUXE CRAFTEX CX SERIES

    Now: CAD $1,399.00
    Was: $1,699.00
    CX104 14" 1HP Wood Band Saw - Craftex CX-Series The CX104 is loaded with features from top to bottom! This band saw is equipped with a solid one piece upper frame steel body, a powerful 1HP motor and features a 14" x 18" work table. With resaw...
    CX104
    Now: CAD $1,399.00
    Was: $1,699.00
    Add to Cart
  • BLAST GATE METAL 6IN. SELF CLEANING
    Pre-Order Now

    6IN. BLAST GATE METAL SELF CLEANING FOR DU

    CAD $37.99
    B3049 6" Aluminum Self-Cleaning Blast Gate This aluminum self cleaning blast gate clears itself each time it is opened/closed. The benefit in self cleaning blast gates is that no dust or debris can build up or get caught in the blast gate causing loss...
    B3049
    CAD $37.99
    Pre-Order Now
  • SCROLL SAW 20IN. CW STAND AND LIGHT DEWALT
    Add to Cart

    DeWalt

    SCROLL SAW 20IN. CW STAND AND LIGHT DEWALT

    CAD $779.00
    DW788BS 20" Variable Speed Scroll Saw Plus BONUS Stand & Lamp - DEWALT FEATURES Up front controls Electronic variable speed Multi-directional dust blower Tool-less blade change Uses plain pin less blades Ratcheting tension lever Permanent magnet...
    DW788BS
    CAD $779.00
    Add to Cart
  • DUST DEPUTY DIY CYCLONE ONLY ONEIDA
    Add to Cart

    Oneida Air Systems

    DUST DEPUTY DIY CYCLONE ONLY ONEIDA

    CAD $75.00
    DIYCYCLONE Dust Deputy The Dust Deputy is an extremely efficient, cyclonic pre-separator for vacuums. Trap dust in the barrel and NOT in your vacuum. The Dust Deputy will filter 99% of sanding dust, with only 1% going into the vacuum. Extend the life...
    DIYCYCLONE
    CAD $75.00
    Add to Cart
  • POWER FEEDER 1/4HP 4 SPEEDS CRAFTEX CSA
    Add to Cart

    Craftex CX Series

    POWER FEEDER 1/4HP 4 SPEEDS

    Now: CAD $1,149.00
    Was: $1,299.00
    CXP02 1/4-HP Four Speed Power Feeder – Craftex CX-Series The CXP02 features a 1/4-HP, 110-Volt motor and three synthetic rubber feed rollers that eliminate the chore of feeding stock by hand and increases shop production. This power feeder has four...
    CXP02
    Now: CAD $1,149.00
    Was: $1,299.00
    Add to Cart
  • POWER FEEDER 1/8HP VARIABLE SPEED
    Add to Cart

    Craftex CX Series

    POWER FEEDER 1/8HP VARIABLE SPEED

    Now: CAD $749.00
    Was: $799.00
    CXP01 1/8-HP Variable Speed Power Feeder – Craftex CX-Series Increase your shop production with this Variable Speed Power Feeder. The CXP01 is designed with a 1/8-HP, 110-Volt motor providing a feed rate of 6-1/2 to 39 feet per minute for...
    CXP01
    Now: CAD $749.00
    Was: $799.00
    Add to Cart
  • HOSE CLAMP 2 1/2IN.
    Add to Cart

    2.5IN. HOSE CLAMP METAL

    CAD $3.99
    B2980 2-1/2" Hose Clamp Suitable for use with multiple hose materials Easy to install Compatible with 2-1/2" hose sizes
    B2980
    CAD $3.99
    Add to Cart
  • SANDING BELT 6 X 48 220G
    Add to Cart

    Klingspor

    SANDING BELT 6 X 48 220G

    CAD $14.50
    B357220 6" x 48" Aluminum Oxide Abrasive Belt  Replacement belt for the B318N, B023N & B2193 Grit: 220
    B357220
    CAD $14.50
    Add to Cart
  • ROUTER COMBO 1 1/4 HP PREMIUM PLUNGE/FIX
    Add to Cart

    DeWalt

    ROUTER COMBO 1 1/4 HP PREMIUM PLUNGE/FIX

    CAD $319.00
    DWP611PK 1.25 HP Max Torque Variable Speed Compact Router Combo Kit with LED's Durable 1.25HP motor delivers the power to meet the toughest applications with variable speed control feature enabling bit speed to be optimized for changing applications...
    DWP611PK
    CAD $319.00
    Add to Cart

Subscribe to our newsletter

Sign up to our newsletter to get the latest updates on new products and upcoming sales delivered to your inbox. We respect your privacy, we will never share or sell your email.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley