Features:Fits into a 3/8” hole in the top of the auxiliary fenceSteel threaded components with rigid aluminum bodyRange of travel 1/2″-5-3/4″ (12mm to 146mm) Specs: Clamp Arm Size: 3/8"Range of Travel: 1/2" – 5-3/4” (12mm – 146mm)Material: Aluminum and steelIncludes: Set of two FenceClampsWeight: 0. 95 lbs.

Hinge Bit Set #4, #6 and #8 - Milescraft Pre-Drill Perfectly Centered Holes for Proper Alignment 1/4" hex shaft fits all drills Spring-loaded drill bits Self-centering Sizes: 5/64", 7/64", 9/64" Screw compatibility: #3, #4, #5, #6, #8 & #10.

Adjustable from 90° degrees to 45° degreesEasy to read scale permanently cast into the aluminum baseGuide base is formed for exact centering on round or flat edgesAdjustable depth stop for drilling holes to a precise depthSpring action controls the rate of drill penetration and returnRemovable handle adds control for a variety of applicationsDrill accurate angles and depths3/8" drill chuck with key.

Produce tapered plugs from the same stock for superior grain matching or for removing small blemishes. Set includes bits for drilling scrap project material to produce tapered plugs to cover screws or hide blemishes.

Quickly and accurately locate and/or measure and mark blade and bit heights, and fence offsets. Depth Gauge Features: Durable metal scale measures in inches or millimeters Metal locking knob Wide base with sturdy feet Straddles most table saw throats for measuring while adjusting.

Set includes stop collars for controlling drill bit depth to a precise setting. Six piece set includes stops for 3/16, 1/4, 5/16, 3/8, 7/16, and 1/2-Inch diameter drill bits.

Insert Molded Hardened Steel BushingsEnsure accurate alignment when drilling for perfectly positioned dowels for longer doweling lifeAdjustable Guide Fence. Easily adjust to the depth of the board so that each hole will be precise from one to the nextCan be removed without removing the guide knobsCompatible with 1/2″ to 1-1/2” thick lumberSteel Dowel/Tenon Centers for durable and accurate location marking of dowel holes or in the second board being joined.

Multi-Axis Centering Lines - Built-in vertical and horizontal centerlines for accurate drill guide alignmentV-Groove Channel - Rubber coated V-groove for drilling on cylindrical stock or cornersMore Grip - Improved surface grip with even more non-slip surfaces, including the expanded v-groove channelErgonomic Design - Patented design conforms to grip for comfort during use Specifications: Material: Reinforced nylon and hardened steel bushings block with non-slip TPE FeetBushing Sizes: 3/32”, 1/8”, 9/64”, 5/32”, 3/16”, 1/4", 5/16”, 3/8”, 1/2”.

The 3" face clamp is perfect for pocket hole joinery, general clamping, and much more. The handy and versatile FaceClamp helps create a flush joint during pocket hole assembly.

Designed to accept standard 5” (125mm) sanding discsHook and loop prevents sandpaper from slipping and comfortFour Interchangeable Sanding ProfilesFor Concave, Convex, V-Groove, and Flat surfacesSpecifications:Profiles - Concave, Convex, V-Groove, FlatProfile Length: 5"Profile Material: TPESandPlane Body Material: ABSSanding Disc Size: 5"Sanding Disc Grit: 150 Includes: Four sanding profiles, SandPlane, and (1) 5" sanding disc.

Eliminates the need for multiple sanding tools. Quickly change between different grits of sandpaper with the snap-lock design.

5mm Shelf pin Bit - Miles Craft Self-Centering Custom Spring-Loaded Brad Point Drill Bit Self-centering boring bits in 5 mm diameter 3/8" guide bushing for precise and repeatable hole locations Spring-loaded HSS brad point drill bit.

Articulating pencil head, for complex anglesAdjustable writing instrument grip can hold No. 2 pencils, carpenter pencils, and Sharpie® (or similar) markersBuilt-in pencil sharpener for keeping your pencil sharp and your line crispRetractable, spring-loaded, locking precision point for a precise radiusIdeal For ScribingOffsetsEdge WorkFlooringCirclesand much more.

Laminate Trimmer - MILESCRAFT Ideal for veneer and laminate trimming. This laminate trimmer allows you to trim the edges of your finished product, with a smooth cut.

2 Font Stencils (Modern & Old English) and line drawings 3 Router Bits (1/4” V-Groove Router Bit, 1/4” Straight Router Bit and 3/8” Long Reach Core Box Router Bit) 3 Stylus Tips (large head stylus tip, small head stylus tip and pointed stylus tip).

Fits most contractor and homeowner saws with internal and external motors and with or without dust ports Quick and easy to install Sturdy, long-lasting, nylon fabric attaches to either stand or inside the saw base No clogging The internal baffle prevents clogging and bag collapse Virtually eliminates sawdust Reduces health risks of known carcinogen Use your saw indoors or out. Never needs removing to empty Bag Capacity: 3 cubic feet.

The pocket clamp allows for quick and easy projects with 90° degree joints. Just slip the pin in your pocket hole joint and clamp to the adjoining surface and just drive your screws in to keep your projects nice and square.

The 6" face clamp is perfect for pocket hole joinery, general clamping, and much more. The handy and versatile FaceClamp helps create a flush joint during pocket hole assembly.

The 2" face clamp is perfect for pocket hole joinery, general clamping, and much more. The handy and versatile FaceClamp helps create a flush joint during pocket hole assembly.

The Milescraft PocketJig200 pocket hole jig allows you to connect your workpieces in a quick and timely manner. Whether you want to build storage projects, cabinets, shelves or bookcases, this kit does it all.