The 2" face clamp is perfect for pocket hole joinery, general clamping, and much more. The handy and versatile FaceClamp helps create a flush joint during pocket hole assembly.

The 3" face clamp is perfect for pocket hole joinery, general clamping, and much more. The handy and versatile FaceClamp helps create a flush joint during pocket hole assembly.

The 6" face clamp is perfect for pocket hole joinery, general clamping, and much more. The handy and versatile FaceClamp helps create a flush joint during pocket hole assembly.

5mm Shelf pin Bit - Miles Craft Self-Centering Custom Spring-Loaded Brad Point Drill Bit Self-centering boring bits in 5 mm diameter 3/8" guide bushing for precise and repeatable hole locations Spring-loaded HSS brad point drill bit.

Quickly and accurately locate and/or measure and mark blade and bit heights, and fence offsets. Depth Gauge Features: Durable metal scale measures in inches or millimeters Metal locking knob Wide base with sturdy feet Straddles most table saw throats for measuring while adjusting.

1/4" Dowel Kit - Milescraft The Kit Contains All the Parts Needed to Properly Install Wooden Dowels.

5/16" Dowel Kit - Milescraft The Kit Contains All the Parts Needed to Properly Install Wooden Dowels.

5/16" Dowel Kit - MILESCRAFT One 5/16" TiN coated brad point bit Two 5/16" dowel hole centers for easy location transfer One 5/16" steel drill stop with set screw and Allen wrench Twelve 5/16" fluted dowel pins with chamfered ends for superior glued dispersion and easy installation Dowel pins made of hardwood harvested from responsibly managed Forest Stewardship Council (FSC) Certified forests.

Multi-Axis Centering Lines - Built-in vertical and horizontal centerlines for accurate drill guide alignmentV-Groove Channel - Rubber coated V-groove for drilling on cylindrical stock or cornersMore Grip - Improved surface grip with even more non-slip surfaces, including the expanded v-groove channelErgonomic Design - Patented design conforms to grip for comfort during use Specifications: Material: Reinforced nylon and hardened steel bushings block with non-slip TPE FeetBushing Sizes: 3/32”, 1/8”, 9/64”, 5/32”, 3/16”, 1/4", 5/16”, 3/8”, 1/2”.

Adjustable from 90° degrees to 45° degreesEasy to read scale permanently cast into the aluminum baseGuide base is formed for exact centering on round or flat edgesAdjustable depth stop for drilling holes to a precise depthSpring action controls the rate of drill penetration and returnRemovable handle adds control for a variety of applicationsDrill accurate angles and depths3/8" drill chuck with key.

Set includes stop collars for controlling drill bit depth to a precise setting. Six piece set includes stops for 3/16, 1/4, 5/16, 3/8, 7/16, and 1/2-Inch diameter drill bits.

Features:Fits into a 3/8” hole in the top of the auxiliary fenceSteel threaded components with rigid aluminum bodyRange of travel 1/2″-5-3/4″ (12mm to 146mm) Specs: Clamp Arm Size: 3/8"Range of Travel: 1/2" – 5-3/4” (12mm – 146mm)Material: Aluminum and steelIncludes: Set of two FenceClampsWeight: 0. 95 lbs.

Hinge Bit Set #4, #6 and #8 - Milescraft Pre-Drill Perfectly Centered Holes for Proper Alignment 1/4" hex shaft fits all drills Spring-loaded drill bits Self-centering Sizes: 5/64", 7/64", 9/64" Screw compatibility: #3, #4, #5, #6, #8 & #10.

Laminate Trimmer - MILESCRAFT Ideal for veneer and laminate trimming. This laminate trimmer allows you to trim the edges of your finished product, with a smooth cut.

Insert Molded Hardened Steel BushingsEnsure accurate alignment when drilling for perfectly positioned dowels for longer doweling lifeAdjustable Guide Fence. Easily adjust to the depth of the board so that each hole will be precise from one to the nextCan be removed without removing the guide knobsCompatible with 1/2″ to 1-1/2” thick lumberSteel Dowel/Tenon Centers for durable and accurate location marking of dowel holes or in the second board being joined.

Fits most contractor and homeowner saws with internal and external motors and with or without dust ports Quick and easy to install Sturdy, long-lasting, nylon fabric attaches to either stand or inside the saw base No clogging The internal baffle prevents clogging and bag collapse Virtually eliminates sawdust Reduces health risks of known carcinogen Use your saw indoors or out. Never needs removing to empty Bag Capacity: 3 cubic feet.

For longer doweling life Adjustable Guide Fence: Easily adjust to the depth of the board so that each hole will be precise from one to the nextCan be removed without removing the guide knobsCompatible with 1/2″ to 1-1/2” thick lumber Specifications: Bushing Sizes: 1/4", 5/16", 3/8"Minimum Board Width for 1/4" & 5/16" bushing: 2"Minimum Board Width (not thickness) for 3/8" bushing: 3-1/4"Closest distance for dowel from board end (for 1/4" and 5/16" bushing): 1-1/8"Closest distance for dowel from board end (for 3/8"): 1-5/8"Bushing Material: MetalJointMate Body Material: ABS Plastic.

2 Font Stencils (Modern & Old English) and line drawings 3 Router Bits (1/4” V-Groove Router Bit, 1/4” Straight Router Bit and 3/8” Long Reach Core Box Router Bit) 3 Stylus Tips (large head stylus tip, small head stylus tip and pointed stylus tip).

Produce tapered plugs from the same stock for superior grain matching or for removing small blemishes. Set includes bits for drilling scrap project material to produce tapered plugs to cover screws or hide blemishes.