LAGUNA REVO 15 X 24 LATHE

Special Order, allow 3 to 4 weeks delivery if in stock with Laguna. Check with a Busy Bee Team member for accurate stock status.

With the launch of the Revo 15|24 Laguna is filling the gap between the Revo 12|16 & the legendary Revo 18|36, providing space constrained users with more power and capacity. The Laguna 15|24 REVO lathe provides more power and capacity in a constrained space while plugging into a standard 110V outlet (15 Amp service required).

The headstock, banjo and tailstock are fully removable from the bed. The tailstock features on-board tool storage for the live center and drive center (included). A tool shelf mounts to the left of the headstock with storage for the knockout bar and other lathe tools.

The headstock can be repositioned to the tail end of the bed for outboard turning. The optional 20” extension (item #172165, sold separately) can expand your outboard turning options.

A 24-position indexing plate allows the headstock to rotate in 15° increments. The headstock and tail stock accept an MT2 taper.

Precise Position adjusts the spur drive for the ideal point-to-point alignment between the drive center and the drive center. This simple adjustment of 4 screws and minor manipulation of the drive center brings your 15|24 lathe into ideal alignment for turning.

The PWM (Pulse Width Modulation) motor utilizes transistors for fast communication between the motor and controller. PWM controls stabilize the RPM and provide consistent torque (voltage) when using speeds at low RPM so you can turn with confidence at any speed on the Laguna REVO 15|24 Lathe.

Adjustable legs allow you to set the height of the 15|24 lathe at just the right height. Leveling feet provide micro adjustments to properly level the lathe.

Features

World-class fit and finish Laguna is known for
Sliding headstock for ergonomic outboard bowl turning
Infinite electronic variable speed from 50 – 4200 RPM with a 3 step pulley
Extraordinary torque even at low speeds, powered by Laguna Pulse Width Modulation
Adjustable-height legs allow a more ergonomic working position tailored to individuals needs
Steel bed provides strength, stability and a surface that the banjo will glide across smoothly
A brand new feature is the patent-pending Precise Point that allows you to dial in the tailstock quill to meet with the headstock center.

Specifications:

Electrical: 1.5HP, 110 Volt, 8Amp, 60 Hz
Motor: Permanent Magnet DC, 2150 RMP
PWM: Pulse Width Module Speed Control
Recommended Breaker: 15 Amp
CSA C/US: 256540
Spring Loaded Spindle Lock
Swing Over Bed: 15-1/2″
Swing Over Banjo: 11-3/32″
Max. Outboard Swing With Optional Accessory: 25″
Tool-Rest Post Size: 1″
Tool-Rest Length: 12″
Spindle Taper: MT#2
RPM High: 650-4200
RPM Mid: 325-2100
RPM Low: 50-650
Tailstock Quill: 4-1/2″, Self-Ejecting
Floor To Spindle Center Low: 36-13/32″
Floor To Spindle Center High: 51-13/32″
Floor To Bed Min.: 28-19/32″
Floor To Bed Max.: 43-19/32″
Front Bearing: TPI Taiwan 6206LLU
Rear Bearing: TPI Taiwan 6205LLU
Spindle Index #: 24 with Lock
Distance Between Centers: 24″
Headstock/Tailstock Through-Bore: 3/8″
Headstock Travel: Full Length
Tailstock Storage Of Centers
Spindle Size: 1-1/4″ x 8TPI RH

Floor Space (W x D x H): 60″ x 22″ x 56″
Box Dimensions (L x W x H): 52″ x 22″ x 22″
Weight (Net/Ship): 130.65/137 Kg (288/302 lbs)