OSMO TOP OIL CLEAR

Osmo TopOil High Solid is a premium, food-safe Hardwax-oil finish crafted for countertops, tabletops, and chopping boards. Engineered for durability, this finish provides a strong, protective layer that is resistant to common household spills and stains, making it ideal for high-use surfaces. Not only is it easy to maintain, but it also enhances the natural beauty of wood, offering a breathable finish that doesn’t crack, peel, or flake. Based on renewable raw materials, Osmo TopOil is environmentally friendly and safe for direct food contact.

Features:

• Food-Safe Certified: Meets DIN and EN standards, safe for surfaces in direct contact with food.
• Ideal for High-Use Surfaces: Perfect for countertops, tabletops, and chopping boards.
• Durable and Hard-Wearing: Strong resistance to water, chemicals, and everyday wear.
• Spill Resistant: Liquids like wine, beer, cola, coffee, tea, fruit juices, milk, and water bead up on the surface, preventing stains.
• Children’s Toy Safe: Saliva-resistant and sweatproof, making it suitable for children's items.
• Breathable and Microporous: Allows wood to breathe and prevents cracking, peeling, or flaking.
• Easy to Maintain and Repair: Can be spot-repaired and refreshed without the need for sanding.
• Eco-Friendly Ingredients: Contains renewable raw materials such as soybean, sunflower, thistle oil, and natural waxes (carnauba and candelilla).

Specifications:

• Coverage: Approximately 24m²/L (258 ft²/L) with one coat.
• Number of Coats:
• 2 coats if applied with a brush
• 3-4 coats if applied with a cloth
• Application Temperature: +5°C to 35°C
• Dry Time: Approximately 8-10 hours
• Color: Clear

Application Instructions

By Hand with a Cloth/Rag

Apply three thin coats with a lint-free cloth.

1.  Scrub product into wood using cloth in a circular or figure 8 pattern

2.  Allow roughly 15-minutes for oils to penetrate

3.  Working with the grain, remove all excess product from surface

4.  Allow 8-10 hours drying time before recoating

5.  Apply second and third coats following previous steps

By Hand with a Brush

Apply two thin coats with an Osmo Natural Bristle Brush or similar brush.

1.  With a brush, work product into wood working in all directions, ensuring a thin application

2.  Allow roughly 15-minutes for oils to penetrate

3.  Working the brush with the grain, evenly distribute all product on surface and remove excess

4.  There should be no visible high-build or film – if this is observed, product is over applied

5.  Allow 8-10 hours drying time before recoating

6.  Apply second coat following above procedure

7.  Clean brushes using Osmo Brush Cleaner and Thinner or Turpentine

Tinting: Osmo Wood Wax Finish can also be used to lightly tint TopOil 3056 up to a ratio of 10:1. Do not exceed a ratio of 10 parts TopOil 3056 to 1 part Wood Wax Finish.